The aftermarket SmartTOP Convertible Top Controllers made by Mods4cars for Peugeot 307 CC and 308 CC received a facelift redesign. They now ship in a new, custom designed module enclosure, specifically made by Mods4cars for the purpose. It is smaller and slimmer and thereby easier to install in tight locations in the car. Two LEDs show status information and aid during the install process.
Las Vegas, NV (USA), March 25th, 2015 — The SmartTOP Convertible Top Controllers offered by aftermarket automotive electronics specialist Mods4cars provide simple and easy roof controls for convertibles. On Peugeot 307 CC and 308 CC the product allows opening and closing of the top while the car is moving, up to 40 km/h (~28mph). Thanks to the one-touch operation, the top switch only needs to be tapped once. It is no longer necessary to pull over and hold the switch down for the entire time.
Additionally the top can be controlled from the original key fob remote by issuing a key combination. This makes it possible to open the top before getting in the car. Vice versa it is also possible to close the top from a distance at the first sign of impending rainfall. No changes are necessary to the original key fobs or receiver system.
Apart from these two main features, SmartTOP modules for Peugeot 307 CC and 308 CC also come with a few bonus features: Windows can be controlled separately from the top by remote. The “all windows” switch in the car can be made to close all windows with one-touch convenience. And a windows comfort feature allows the driver to still operate all windows for up to 60 seconds after turning the ignition off. An extended mode can be activated which allows the top to continue running while the engine is being started or stopped. The entire module can be deactivated temporarily while retaining all user configurable settings.
All features of the module can be configured according to individual needs. Configuration of the module is extremely simple. Mods4cars was able to control the center display in the dash to show a clear text setup menu which shows all functions and settings of the top module in an easy to understand way.
Now Mods4cars redesigned the looks of their smart modules. “The new product enclosure was exclusively designed by and made for Mods4cars to perfectly meet all the needs of the module.” explains PR-Manager Sven Tornow. “It is about 30% smaller and can be fitted easily in tight spaces in the car. Additionally there are two LEDs now that show status and troubleshooting information in order to make installation simple and straight forward.” he continues.
The SmartTOP modules come equipped with a standard USB port. This port allows quick and easy configuration of the module via Mac or PC as well as firmware updates. Support software and updates are available free of charge online. The kit comes with a full plug-and-play wiring adapter harness for quick and simple connection of the module to the car electronics. No wires need to be cut or spliced, no soldering is necessary and everything can later be removed without leaving any damage or trace.
SmartTOP kits by Mods4cars are available for the following popular brands: Alfa, Audi, Bentley, BMW, Ferrari, Ford, Infiniti, Jaguar, Lamborghini, Mazda, Mercedes-Benz, Mini, Nissan, Opel, Peugeot, Porsche, Renault, Volvo and VW. The SmartTOP Convertible Top Controller kit for Peugeot 307 CC and 308 CC is available for 249 Euros + tax. A kit is also available for the Peugeot 207 CC.
Product demonstration SmartTOP for Peugeot 307 CC:
Product demonstration SmartTOP for Peugeot 308 CC:
Mods4cars was founded in 2002 with the idea to add a highly demanded feature to the otherwise almost perfect Porsche Boxster: Comfort One-Touch roof operation while driving at slow speeds. The resulting product offered not only that, but also allowed quick and easy installation by just swapping out a relay box, thus leaving no traces and no permanent changes on the vehicle. The first SmartTOP roof controller was born.
The success of their first products in Germany and Europe prompted them in late 2004 to move operations to the USA, to be able to serve the American market as well as all other English speaking countries such as Australia, UK and South Africa from one central location. Their business has grown to a full-fledged international corporation with an office in Las Vegas and a full line of innovative products as well as distributors and installation partners all over the globe.
Being highly specialized in the development and distribution of aftermarket roof- and comfort controllers since 2002 allows them to offer an unsurpassed level of competence and product quality. Their main goal is optimization of each individual product to a maximum in compatibility, usability and intuitive operation. They put greatest effort into development and quality checks of all their products to achieve this goal and meet all expectations of their customers.
The extraordinary success of their products is also based on the great communication with their customers, which usually already starts for each new product during the development and prototyping phase.
Press & Media Contact:
1350 E. Flamingo Rd #3100
Las Vegas, NV 89119 – USA