Category Archives: Technology

Chiller Noise No Longer Problem After Acoustifence Barrier Installed

Installation of a 24-foot noise barrier utilizing Acoustifence outdoor sound abatement material at the new Sheboygan Festival Foods store is complete, ending complaints from nearby residents over extreme levels of noise leaking from the store’s industrial refrigeration chillers into the community.

Folks in Sheboygen were celebrating when the popular Wisconsin-based Festival Foods grocery chain opened the 70,000 square foot mega store here on September 16, 2011. Less than two weeks later, the community’s warm welcome had grown icy as neighbors began to complain about noise from the store’s industrial refrigeration chiller that was so loud, it violated the city’s noise ordinance.

Festival Foods enlisted the help of Acoustical Engineer Eric Wolfram of Milwaukee-based Scott R. Riedel & Associates, LTD, who consulted with Acoustiblok’s Jay Boland to choose Acoustifence noise barrier material, a product of Acoustiblok, Inc. of Tampa Florida, to bring the decibel level down below the legal threshold and restore peace and quiet to the neighboring community.

When Wolfram first investigated the site in September, decibel readings ranged between 78.4 and 90.7, loud enough to be a risk for noise-related health problems to nearby residents and workers, had they been subjected to the noise over time. The Sheboygan Department of City Development demanded the level be reduced by at least five decibels, Wolfram said.

“The existing refrigeration pump and motor systems produce extreme noise levels,” Wolfram said. “This noise reverberates within the sheet-metal paneled enclosure interior and escapes through several different exhaust and ventilation openings.

“Additional noise was generated by the cooling and exhaust fans mounted above the enclosure.”

Working with sound consultants from Acoustiblok, Inc., Wolfram designed a two-step solution, creating a barrier with Acoustifence noise deadening material to block noise around the massive system, and incorporating another Acoustiblok product, QuietFiber, to help reduce sound from reflecting off of the taller adjacent building behind the chillers.

Minimal structural changes were required, as the ⅛- inch Acoustifence was easily attached to an existing chain link fence and the outdoor-rated QuietFiber with a perforated metal cover was capconed to the building.

The results were better than Wolfram had hoped, with decibel levels reduced to 57.3 the moment the barrier was in place – well below the City’s legal threshold, and more than 20 decibels lower than before the Acoustiblok products were installed. Neighbors are no longer bombarded with the irritating chiller noise, now replaced with the ordinary ambient sounds that existed before.

“Sounds from local traffic and roadways exceeded that of the compressor equipment after installation of the Acoustifence and QuietFiber products,” Wolfram said.

Lahnie Johnson, founder and president of Acoustiblok, Inc., applauded Festival Foods’ quick action in addressing the noise complaints right away, stating that the product combination was the perfect solution for this particular type of noise challenge.

“The Acoustifence and QuietFIber treatments were the perfect solution for the Festival Foods chiller noise, as both of these materials are designed to hold up in inclement weather, and as you can see from the results, they do their job well beyond everyone’s expectations,” Johnson said. “The Acoustifence and Quiet Fiber are also substantially less costly than attempting a structural enclosure solution.”

For more information on industrial noise solutions, visit the Acoustiblok website, Email sales@acoustiblok.com, or call 813-980-1400.

###

Acoustiblok Creates Damped, Expandable Acoustical Envelope in New York ITB Recording Studio

Acoustiblok noise abatement material was installed in the nearly completed Artist Workshop Studios recording facility, an in-the-box (ITB) studio designed and built by Artist Workshop Studios owner Tom Donofrio. Acoustiblok was chosen to provide a sound barrier for the small, 12 foot x 12 foot basement studio that could drop decibels levels within the space and provide a neutral acoustical environment for recording.

Donofrio, an electrical engineer, and musician who has built recording studios in the past using different sound deadening materials, chose Acoustiblok for his newest project after consulting with Marilyn Myers of Acoustiblok, Inc., because of its sound damping and noise blocking qualities, as well as its thin, flexible structure that adds no volume to walls within the studio space. Attached to the studs before drywall is hung, Acoustiblok performs without the need to add layers of rigid drywall or modified drywall, a method Donofrio used in the past with mixed results and significant floor space reduction.

“I was looking for a product that would lower the decibels in the studio without taking up any additional space,” Donofrio said. “I was able to achieve the neutral acoustics desired in the space, which makes me extremely happy.

“I didn’t want a sound quality that was too dead or too live, so the Acoustiblok turned out to be an excellent choice.”

Donofrio and a friend were able to hang the 3mm Acoustiblok on the newly framed stud walls within the studio space, including cutouts around a window and electric sockets, and seal the seams according to installation recommendations, all in less than four hours.

The Artist Workshop Studios recording space was built for Donofrio to indulge his own talents as an acoustical guitarist and vocalist, and to be made available to artists on a budget who need an affordable studio with high quality production equipment and the expertise of a seasoned technician to record a song or album.

“Acoustiblok is a perfect choice for establishing sound quality within a sound recording studio like this one,” said Lahnie Johnson, president and founder of Acoustiblok, Inc.

“Unlike additional drywall or other solid rigid materials used for sound reduction, the 1/8-inch heavy, limp Acoustiblok allows the room to be a damped, expandable acoustical envelope. As such, a studio or home theater has less reflection and actually sounds significantly better.”

###

Quiet Fiber® Used to Quiet Industrial Generator Noise at Galleria 360 in Santo Domingo

Installation of 18,000 square feet of non-fiberlass Quiet Fiber® noise absorbing material has been completed in the massive generator room of the newly constructed, 750,000 square foot Galleria 360 mall in Santo Domingo.

Quiet Fiber, a product of Acoustiblok, Inc. in Tampa, Florida, was installed on the ceiling and walls of the mall’s generator and substation rooms. These rooms house the industrial emergency generators necessary to keep power running in this coastal area of the Caribbean, plagued by frequent power outages.

The Galleria 360’s industrial generators, installed by Santa Domingo-based Edelca, are a staple in this island republic. Edelca owner Carlos Montos, Edelca consulted with Jay Boland of Acoustiblok, Inc., and used Quiet Fiber on the project after achieving excellent results with Quiet Fiber on a similar project at the La Sirna Superstore in the eastern coastal town of Higuey, Dominican Republic.

“Even though Quiet Fiber is not the least expensive product on the market, I keep coming back to it because the results beat all the competitors’ noise deadening products with double the noise insulating qualities,” Montos said. “The customer on this job wanted to install a double layer of a different product but I convinced him to try the Quiet Fiber.

“I’ve been designing and installing these emergency generators for 20 years, and I have never had the results from other noise abatement products that I have with Quiet Fiber, and now I’m trying to use it everywhere.”

Montos says noise from these industrial generators on which the island has become dependent in order to maintain consistent power is a major problem plaguing businesses and residential property owners when the generators are running. Not only is generator noise bad for business, but its constant drone can cause permanent hearing loss. Another important consideration in the selection of soundproofing material is its fire resistance.

Recently in Santo Domingo a serious fire started in a generator room, and the existing foam sound proofing material was a prime contributor. The fire caused Montos to search for a new fireproof solution. Quiet Fiber is fire resistant even at 2,000 degrees.

“The noise levels are almost unbearable, so you need to have an adequate level of soundproofing in place when they are running,” Montos said. “I always install noise absorbing material wherever I install my generators, and Quiet Fiber is the best soundproofing product we’ve ever used.”

Montos and his crew were able to easily cut the Quiet Fiber to fit around electric conduits, and secured the material to the walls and ceiling with standard insulation stick pins.

The sound deadening qualities of Quiet Fiber will help to protect the mall’s employees, and streams of tourists and local residents from the high volume industrial noise caused by the generators when they are operating.

Lahnie Johnson, president and founder of Acoustiblok, Inc., says that the application of Quiet Fiber in the Galleria 360 generator and substation rooms was exactly what was needed for addressing the high decibel, reverberant sound emanating from the concrete walls.

“Quiet Fiber was designed with this type of hot, humid environment in mind,” Johnson said. “When you’re addressing solid surface noise issues, which in this case with concrete walls, you need a product with proven maximum sound absorption, high temperature rating for fire blocking, and hydrophobic (resistant to moisture).”

###

Zevrix Updates LinkOptimizer for Adobe InDesign CS6 Compatibility

Zevrix Solutions announces LinkOptimizer 4.7, a compatibility update to its popular workflow automation solution for Adobe InDesign. Awarded 4 out of 5 starts by Computer Arts magazine, LinkOptimizer allows to reduce InDesign job size and speed up processing by eliminating excess image data, performs essential image adjustments, converts image formats and more. The new version makes LinkOptimizer compatible with recently released InDesign and Photoshop CS6.

Toronto (ON), Canada – May 22, 2012 – Zevrix Solutions today announces the release of LinkOptimizer 4.7, a compatibility update to its popular workflow automation solution for Adobe InDesign. Awarded 4 out of 5 starts by Computer Arts magazine, LinkOptimizer automates complex image manipulation tasks allowing to significantly reduce the size of InDesign job, save processing time and reduce production costs.

The new version makes LinkOptimizer compatible with recently released InDesign and Photoshop CS6, and addresses some stability and performance issues. The update is free to LinkOptimizer users. The same version of LinkOptimizer can be used with any version of InDesign from CS3 to CS6.

LinkOptimizer works automatically with Adobe Photoshop to eliminate the excess image data of InDesign links, perform essential image adjustments and convert image formats. For example, with just a click of a button users can:

-scale and crop images to match their dimensions in InDesign,
-change their resolution to 300 ppi,
-convert all RGB images to CMYK,
-resave all JPEG images as TIFF,
-run a Photoshop Action on each image.

At the end of processing, LinkOptimizer reimports images to InDesign at 100% in their precise position. In addition, the software can apply sharpening filters, merge layers and delete hidden ones, and process copies of InDesign documents and images instead of original files. As a result, users can save gigabytes of disk space and countless hours of optimizing images manually; accelerate document output; reduce job turnaround and cut costs through faster processing.

Pricing and Availability:
LinkOptimizer can be purchased from Zevrix website for US$259.95 (Light version: $179.95) as well as from authorized resellers. Trial is also available for download. The update is free for LinkOptimizer 4.x users and $98.78 to upgrade from previous versions. LinkOptimizer is available for Mac OS X 10.4.2-10.7, a Universal Binary, and works with Adobe InDesign CS2-CS6.

About Zevrix Solutions

Located in Toronto, Canada, Zevrix Solutions provides productivity solutions for Adobe Creative Suite software, PDF and graphic file diagnostics, as well as Microsoft Office on Mac OS. Zevrix Solutions is dedicated to helping professionals increase their profits through automating their everyday tasks, producing error-free documents, saving disk space and cutting production costs. For more information, visit http://www.zevrix.com.

Contact:
Leo Revzin
Owner
Zevrix Solutions
105 McCAUL St, Suite 301
Toronto Ontario M5T 2X4 Canada
858-206-0607
media@zevrix.com

Solutions for Adobe InDesign & the Graphics Industry

Free Version of Defect Documentation Tool for Testers / Software Developers Available

QASymphony offers free version of qTrace that cuts defect reporting by 70%.

Dublin, CA (USA), Tuesday – May 22, 2012 — QASymphony ( http://www.qasymphony.com ), the developer of qTrace, an intelligent defect documentation Quality Assurance tool that helps testers create practical, detailed and informative defect records, today announced a free version of its popular qTrace tool for testers and software developers.

qTrace solves the sometimes agonizing and time-consuming practice of reproducing and reporting of found defects during the software testing process. While simple defects are easy to replicate, complex or intermittent defects require a lot more effort by testers to document and report.

qTrace is not a screen or video capture tool but is instead an intelligent capture technology similar to those found in sophisticated test automation tools. In less than 5 minutes, a tester can have qTrace running, integrated with their defect tracking system, and more quickly create better defect records.

qTrace tracks user’s interactions with an application and uses that information to automatically create detailed defect documentation. qTrace supports the recording of a wide range of applications and technologies on the browser as well as desktop apps.

“Software development testers are frustrated by the amount of effort it takes to communicate complex defects clearly to the development team,” says Vu Lam, CEO of QASymphony. “qTrace is an elegant solution that makes it simple for testers to isolate, highlight, and report software issues. It intelligently produces defect reports that contain detailed scripts of each test step, complete with screen shots and system information.”

qTrace expedites the QA process with more accuracy and brings products to market by as much as 20% faster and cuts everyday defect reporting by 70%.

Useful editing features include annotation tools such as call-out boxes, pointers/arrows, blurring and cropping, making it easy to further enhance the clarity of the defect report.

qTrace is available as a free edition or low-cost Pro edition and can be downloaded at http://www.qasymphony.com. In summary, qTrace:

* Reduces manual documentation efforts and increases accuracy of defect descriptions;
* Shortens defect resolution time by providing more information to the bug fix team;
* Complements and integrates with existing application lifecycle management (ALM) and defect tracking tools.

To see a video of qTrace: http://youtu.be/P43ZJhSdZGI

About QASymphony:
Founded in June 2011 with offices in Dublin, Calif. and Ho Chi Minh City, Vietnam, QASymphony is a software company built to revolutionize how software is tested, adopted, and supported. We are an early stage, self-funded, software-loving team, united by a common belief that software could be better, and better tested. For more information, visit http://www.qasymphony.com.

Website: http://www.qasymphony.com
Facebook: http://www.facebook.com/qasymphony
Twitter: http://www.twitter.com/qasymphony

Press & Media Contact:
Victor Cruz, Principal
MediaPR.net Inc
Atlanta, GA – USA
+1 978-594-4134
vcruz@mediapr.net
http://www.qasymphony.com

LAN Systems and Microsoft “Kinect” the Forsyth County Public Library with an Xbox

LAN Systems and Microsoft have connected the Forsyth County Public Library with an Xbox Kinect and games for their summer program.

Norcross, GA (USA), Monday – May 21, 2012 — LAN Systems, a leading Atlanta Managed IT Service Provider, and Microsoft have connected the Forsyth County Public Library with an Xbox Kinect and games for their summer program.

At a recent Cumming-Forsyth Chamber of Commerce event, Library Director, Jon McDaniel, was the recipient of an Xbox provided by LAN Systems through the Microsoft Community Event program. Jon saw value in using the Xbox for the library’s summer program so LAN Systems and Microsoft teamed up to donate numerous games for all ages. The Xbox will travel between the three FCPL locations and will be used for a special summer program.

With the Xbox Kinect, the player is the controller. With a motion sensor, facial and voice recognition built into the unit, there are no remote controls or joysticks needed for play. With this mobility, it will be easy for the library to offer the educational fun to each of its locations. And with the wide selection of games, there will be something for everyone.

“This is cool technology that will be loved by kids of all ages,” said Mary Hester, CEO LAN Systems. “We can’t wait to find out everyone’s favorite game. It’s going to be a tossup between Disneyland Adventures and Just Dance.”

The Xbox Kinect will make its library debut on June 7 at 6:30 p.m. at “Own the Night,” a teen program at the Cumming Library featuring dance, karaoke, games, and a beach book bag craft,” said Vanessa Cowie, Youth Services Coordinator at the Forsyth County Public Library. “Plans are underway to use the Xbox at many future programs for youth of all ages at all three library branches.”

About the Forsyth County Public Library:
Boasting the title “Best Library in Georgia” five times in the past seven years and listing in the top twelve libraries in the Southeast, the FCPL thrives. FCPL has events and programs for everyone. Visit us at: http://www.forsythpl.org

About LAN Systems:
LAN Systems is a leading Atlanta IT Consulting company that provides people-focused IT solutions. As technology experts, LAN Systems helps companies make the most of their existing IT investment and choose the right solutions to fuel growth. LAN Systems is a leading provider of IT Solutions for growing businesses in the Metro Atlanta. For more information, visit LAN Systems at http://www.lansystems.com.

Press & Media Contact:
Lauren Maxwell
VP of Sales and Marketing
LAN Systems
3079 Crossing Par=
Norcross, GA 30071 – USA
770-662-0312
lauren@lansystems.com
http://www.lansystems.com

Zevrix Updates Output Factory for InDesign: Adds PNG Transparency

Zevrix Solutions announces Output Factory 1.2.1, a feature update to its professional solution to automate output from Adobe InDesign. Output Factory automates printing, exporting and post-processing from InDesign and offers batch processing, single page export, variable file names, layer versioning, preflighting, processing history and more. The new version adds support for PNG transparency in InDesign CS6 and introduces new file queue management options.

Toronto (ON), Canada – May 21, 2012 — Zevrix Solutions today announces the release of Output Factory 1.2.1, a feature update to its professional solution to automate printing, exporting and post-processing from Adobe InDesign. Output Factory automates and simplifies workflows of printers, prepress bureaus, design agencies and publishing houses worldwide, and is the major upgrade of the company’s widely popular plug-in BatchOutput.

“When every second counts Output Factory is a life saver!” says Glen Saville of the self-titled design firm in the UK, “I had a 20 book job to do the other day and had to get PDFs out very quickly, and it was absolutely indispensable!”

The new version introduces support for exporting of PNG files with transparent background from InDesign CS6. In addition, it adds new file queue management options which let users clear the queue automatically after processing with the option to keep the list if any errors occurred.

Output Factory supports printing as well as exporting to PDF, PostScript, EPS, Flash, INX, IDML, EPUB and several image formats. It offers the following key features:

Batch processing of InDesign files
-Output as single pages
-Save groups of output settings and output to several formats at once
-Update modified links automatically
-Assign powerful variable output file names
-Layer versioning: output layer combinations as single files
Preflight InDesign documents and skip the ones with errors
-Preflight final PDFs
-History: keep track of jobs, output files and errors
-Send output files over the Internet and locally

Pricing and Availability:
Output Factory can be purchased from Zevrix website for US$169.95, as well as from authorized resellers. Trial is also available for download. Licensed BatchOutput users can upgrade to Output Factory for $84.97. Output Factory is available for Mac OS X 10.5-10.7 on Intel-based Macs and works with Adobe InDesign CS3-CS6.

About Zevrix Solutions

Located in Toronto, Canada, Zevrix Solutions provides productivity solutions for Adobe Creative Suite software, PDF workflows, graphic file diagnostics, file delivery and Microsoft Office on Mac OS. Zevrix is dedicated to help professionals increase their profits through automating everyday tasks, producing error-free documents, saving disk space and cutting production costs. For more information, visit http://www.zevrix.com.

Contact:
Leo Revzin
Owner
Zevrix Solutions
105 McCAUL St, Suite 301
Toronto Ontario M5T 2X4 Canada
858-206-0607
media@zevrix.com

Solutions for Adobe InDesign & the Graphics Industry

“Technology Business Management—CIO Resource Planning” Focus of Forum

The public is invited to the Government Technology Institute’s Community Technology Forum

Harrisburg, PA, May 18, 2012 — The public is invited to the Government Technology Institute’s Community Technology Forum: “Technology Business Management—CIO Resource Planning” featuring Bob Mori and Jay Wanek of Apptio, Inc. Sponsored by CISCO, the free event is scheduled for 1:30 p.m. to 3:30 p.m., June 12 at Harrisburg University of Science and Technology.

Mr. Mori is senior account manager and Mr. Wanek is senior application development engineer at Apptio, Inc. Apptio is the leading independent provider of on-demand Technology Business Management (TBM) solutions for managing the business of IT.

The emergence of Cloud and SaaS options have shattered the IT monopoly, forcing CIOs to become a competitive service provider and prove their value to the business. Now more than ever, CIOs require a technology business management system to run the business of IT if they are to keep their seat at the table. This perfect storm brewing in today’s IT environment makes this event ideal for CIOs, consultants, programmers, application developers, managers, analysts, software engineers, enterprise architects and information technology professionals, as well as educators, faculty, staff and students in IT project management and computer or information sciences.

Attendees of the no charge event will learn how Apptio can:

1. Increase Visibility into the cost and performance of your services and applications to provide a comprehensive view into your fully loaded costs.

2. Identify Cost Reduction Opportunities and quantify the financial impact (ROI) of IT investments.

3. Effectively communicate the value that IT brings the business by delivering a Bill of IT to each line of business that reflects the cost, usage and value of each IT Service they consume.

4. Automate and align the Budgeting and Forecasting Process to IT Services to gain real time visibility into your budget variances by IT Service, plan for future demand, and proactively reconcile variances with your General Ledger before they impact your Profit & Loss Statement.

Seating is limited. RSVP at www.HarrisburgU.edu/RSVP

Contact:
Steve Infanti
AVP Communications
326 Market Street
Harrisburg, PA 17101
717.901.5146
Sinfanti@HarrisburgU.edu
http://www.harrisburgu.edu/

LAN Systems sponsors Girl Scout CSI event at University of Phoenix

LAN Systems, was delighted to help sponsor the Girl Scout Mother/Daughter Crime Scene Mystery program at the University of Phoenix. Girls, their moms and a group of dedicated volunteers participated in the event to teach scientific and investigative skills.

Norcross, GA (USA), Thursday – May 17, 2012 — LAN Systems, a leading Atlanta IT Service company, was delighted to help sponsor the Girl Scout Mother/Daughter Crime Scene Mystery program at the University of Phoenix. Girls, their moms and a group of dedicated volunteers participated in the event to teach scientific and investigative skills.

The workshop and badge program taught girls from the 4th and 5th grades forensic science techniques and examination of evidence as they solved the crime scene. Activity stations were used to teach blood, hair and fiber analysis and chromatography. The program concluded with a presentation on dichotomous skull analysis and solving the mystery.

Through programs like the Girl Scout Crime Scene Mystery, women in engineering and technology show girls that math and science is fun and challenging. “This was the second time we presented this program,” said Terry Hart, COO LAN Systems. “It was so successful and received such great reviews that we are looking to expand the activities.”

About the Girl Scout of Greater Atlanta:
The Girl Scouts of Greater Atlanta, Inc. serves approximately 41,000 girls and over 17,700 adult members in 34 counties in the greater metropolitan Atlanta area, northwest Georgia and Polk County, TN. Counties include Bartow, Butts, Carroll, Cherokee, Clayton, Cobb, Coweta, DeKalb, Douglas, Fannin, Fayette, Floyd, Forsyth, Fulton, Gilmer, Gordon, Gwinnett, Haralson, Heard, Henry, Lamar, Meriwether, Murray, Newton, Paulding, Pickens, Pike, Polk, Rockdale, Spalding, Troup, Upson, Whitfield and a portion of Polk County, TN. Its administrative headquarters and a volunteer service center are located at 5601 North Allen Road in Mableton, Georgia. Additional service centers are located in Cumming, Dalton and Griffin and thankful to be able to serve our communities and country.

About LAN Systems:
LAN Systems is a leading Atlanta IT Consulting company that provides people-focused IT solutions. As technology experts, LAN Systems helps companies make the most of their existing IT investment and choose the right solutions to fuel growth. LAN Systems is a leading provider of IT Solutions for growing businesses in the Metro Atlanta. For more information, visit LAN Systems at http://www.lansystems.com.

Press & Media Contact:
Lauren Maxwell
VP of Sales and Marketing
LAN Systems
3079 Crossing Par=
Norcross, GA 30071 – USA
770-662-0312
lauren@lansystems.com
http://www.lansystems.com

Zevrix Updates InPreflight Pro for Adobe InDesign CS6 Compatibility

Zevrix Solutions announces InPreflight Pro 2.10, a compatibility update to its document preparation solution for Adobe InDesign. Described as “delightfully simple to use” by Macworld, InPreflight is an all-in-one solution to check InDesign documents, collect them for output and ship to final destination. It combines powerful batch-packaging, quality control and graphic reports. The new version makes InPreflight Pro compatible with the recently released InDesign CS6.

Toronto (ON), Canada – May 17, 2012 — Zevrix Solutions today announces the release of InPreflight 2.10, a compatibility update to its document preparation solution for Adobe InDesign. InPreflight is a powerful all-in-one solution to check InDesign documents, collect them for output and ship to final destination. InPreflight helps graphics and print professionals uncover hidden problems, save disk space through smart batch-packaging, and reduce production time and costs.

“InPreflight is delightfully simple to use and does its job well,” writes James Dempsey in Macworld.

The new version makes InPreflight Pro compatible with recently released InDesign CS6. The update is free to the licensed InPreflight Pro users. The same version of InPreflight can be installed with any version of InDesign from CS3 to CS6.

InPreflight Pro provides a robust, fast, reliable and easy-to-use solution for printers, service providers, ad agencies and publishing houses.

Batch-packaging and job delivery:
InPreflight Pro is the only program that can package multiple jobs automatically with the option to collect all files into one folder. It eliminates the need to collect the same links multiple times for each design, saving users gigabytes of disk space and hours of production time. In addition, users can automatically send collected jobs over the Internet and locally with automatic email notifications, compression and other options.

Quality control:
InPreflight quickly checks InDesign documents for common problems, as well as for hidden issues, otherwise not reported by InDesign (for example, TIFF and EPS compression, embedded fonts and illegal link locations).

Graphic preflight reports:
Users can print graphic preflight reports and save them as PDF with detailed image info saved in PDF notes. The reports can be set up interactively with an option to include detailed paragraph styles report for typography professionals.

Pricing and Availability:
InPreflight Pro can be purchased from Zevrix web site for US$99.95, as well as from authorized resellers. Trial version is available for download. Update is free for licensed users of version 2, and US$55.98 from earlier versions. InPreflight is available for Mac OS X 10.4.2-10.7, a Universal Binary, and works with Adobe InDesign CS2-CS6. File delivery services require Deliver or Deliver Express, which InPreflight users can purchase from Zevrix at a discount.

About Zevrix Solutions

Located in Toronto, Canada, Zevrix Solutions provides productivity solutions for Adobe Creative Suite software, PDF and graphic file diagnostics and Microsoft Office on Mac OS. Zevrix Solutions is dedicated to helping professionals achieve more while doing less through automating their everyday tasks, producing error-free documents, saving disk space and cutting production costs. For more information, visit http://www.zevrix.com.

Contact:
Leo Revzin
Owner
Zevrix Solutions
105 McCAUL St, Suite 301
Toronto Ontario M5T 2X4 Canada
858-206-0607
media@zevrix.com

Solutions for Adobe InDesign & the Graphics Industry