Future Electronics Promotes NCV7428 from ON Semiconductor

Pointe Claire, Quebec (realtimepressrelease) May 20, 2016 – Future Electronics, a global leading distributor of electronic components founded in 1968 by Robert Miller, has announced immediate shipping availability of ON Semiconductor’s NCV7428 System Basis Chip with integrated LIN and voltage regulator.

The NCV7428 from ON Semiconductor is a System Basis Chip (SBC) integrating functions typically found in automotive Electronic Control Units (ECUs). NCV7428 provides and monitors the low voltage power supply for the application microcontroller and other loads and includes an LIN transceiver. Built in control logic ensures safe power-up sequence and the correct reaction to different supply conditions; it also controls mode transitions including the power management and Bus wake-up treatment.

The NCV7428 is LIN2.x and J2602 compliant, offers TxD dominant timeout protection, with transceiver mode controlled by a dedicated input pin. It also offers thermal shutdown protection, is LIN Bus pin protected against transients, and has an under-voltage detector with a reset output.

For more information about ON Semiconductor, the NCV7428, and System Basis Chip (SBC), as well as access to the world’s largest available-to-sell inventory, visit www.FutureElectronics.com

About Future Electronics

Future Electronics is a global leader in electronics distribution, ranking 3rd in component sales worldwide, with an impressive reputation for developing efficient, comprehensive global supply chain solutions. Founded in 1968 by Robert Miller, President, Future Electronics has established itself as one of the most innovative organizations in the industry today, with 5,000 employees in 169 offices in 44 countries around the world. Future Electronics is globally integrated, with one worldwide IT infrastructure providing real-time inventory availability and access, while enabling full integration of its operations, sales and marketing worldwide. Offering the highest level of service, the most advanced engineering capabilities and technical solutions through all stages of the design-production cycle, and the largest available-to-sell inventory in the world, Future’s mission is always to Delight the Customer®. For more information, visit www.FutureElectronics.com.

Media Contact

Martin H. Gordon
Director, Corporate Communications
FUTURE ELECTRONICS
www.FutureElectronics.com
514-694-7710 (ext. 2236)
Fax: 514-630-2671
martin.gordon@FutureElectronics.com

###

Future Electronics Promotes Low Power High Brightness LEDs from Lumex

Pointe Claire, Quebec (realtimepressrelease) May 20, 2016 – Future Electronics, a global leading distributor of electronic components founded in 1968 by Robert Miller, has announced immediate shipping availability of Lumex’s QuasarBrite low power high brightness LEDs.

Recent developments in high brightness LEDs represent one of the most significant innovations in the lighting industry. Low power high brightness LEDs are offering unparalleled benefits in lighting performance, energy efficiency, durability, and cost savings.

The QuasarBrite low power high brightness LEDs from Lumex provide considerable cost savings and are available in many color options.

Typical applications for Lumex’s QuasarBrite low power high brightness LEDs include battery operated handheld devices, outdoor architectural lighting, outdoor indicators, automotive forward lighting, accent lighting, and indicator lights.

For more information about Lumex and low power high brightness LEDs, as well as access to the world’s largest available-to-sell inventory, visit www.FutureElectronics.com

About Future Electronics

Future Electronics is a global leader in electronics distribution, ranking 3rd in component sales worldwide, with an impressive reputation for developing efficient, comprehensive global supply chain solutions. Founded in 1968 by Robert Miller, President, Future Electronics has established itself as one of the most innovative organizations in the industry today, with 5,000 employees in 169 offices in 44 countries around the world. Future Electronics is globally integrated, with one worldwide IT infrastructure providing real-time inventory availability and access, while enabling full integration of its operations, sales and marketing worldwide. Offering the highest level of service, the most advanced engineering capabilities and technical solutions through all stages of the design-production cycle, and the largest available-to-sell inventory in the world, Future’s mission is always to Delight the Customer®. For more information, visit www.FutureElectronics.com.

Media Contact

Martin H. Gordon
Director, Corporate Communications
FUTURE ELECTRONICS
www.FutureElectronics.com
514-694-7710 (ext. 2236)
Fax: 514-630-2671
martin.gordon@FutureElectronics.com

###

Future Electronics and President Robert Miller Host Strategic Supply Chain Solutions Conference

Pointe Claire, Quebec (realtimepressrelease) May 20, 2016 – Future Electronics, a global leading distributor of electronic components founded in 1968 in Montreal, Quebec, Canada by Robert Miller, hosted a Strategic Supply Chain Solutions conference at the company’s worldwide corporate headquarters in Montreal from April 11-15, 2016.

The conference focused on discussing the biggest issues facing customers today and in future, and determining the right solutions to help them. The Future Electronics team, under the leadership of the company’s President, Robert Miller, understands that many customers’ challenges stem from market condition changes. In addition, costs are rising in many regions; China was once considered low cost, but with a strong economy come higher wages. Labor costs are rising, fuel costs have changed, and companies are rethinking their supply chain needs

Another main area of concern for many companies is visibility into their supply chain. For companies who outsource, they want to have assurance that their manufacturing partner has the right supply chain set up, that it’s repeatable. Interruptions are driving the need for greater visibility. Things like earthquakes or fires cannot be anticipated, which makes supply chain security that much more critical.

Tom Galligani, Vice President of FIRST and Supply Chain Solutions for Future Electronics, explains, “Future Electronics’ expert supply chain team is in a great position to mitigate interruptions, by understanding crucial factors such as the location of the semiconductor fabs, and taking into account various considerations including single production or multi production, lead-times, manufacturing capacity, part classification, common vs. non-standard.”

Galligani continued, “Future Electronics places a lot of emphasis on understanding the customer’s manufacturing rhythm, buying patterns, factory locations, and transportation lead times. With proven experience and knowledge on both the supply side and demand side, we are able to consistently achieve an incredible 99.5% on-time delivery rate to our customers – the highest in the industry.”

For more information about Future Electronics, visit: www.FutureElectronics.com

About Future Electronics

Future Electronics is a global leader in electronics distribution, ranking 3rd in component sales worldwide, with an impressive reputation for developing efficient, comprehensive global supply chain solutions. Founded in 1968 by Robert Miller, President, Future Electronics has established itself as one of the most innovative organizations in the industry today, with 5,000 employees in 169 offices in 44 countries around the world. Future Electronics is globally integrated, with one worldwide IT infrastructure providing real-time inventory availability and access, while enabling full integration of its operations, sales and marketing worldwide. Offering the highest level of service, the most advanced engineering capabilities and technical solutions through all stages of the design-production cycle, and the largest available-to-sell inventory in the world, Future’s mission is always to Delight the Customer®. For more information, visit www.FutureElectronics.com.

Media Contact

Martin H. Gordon
Director, Corporate Communications
FUTURE ELECTRONICS
www.FutureElectronics.com
514-694-7710 (ext. 2236)
Fax: 514-630-2671
martin.gordon@FutureElectronics.com

###

Output Factory Server for Adobe InDesign Now Supports InCopy Workflow

Zevrix Solutions announces Output Factory Server 1.2.14, a feature update to its output workflow automation solution for Adobe InDesign. Output Factory Server automates printing and exporting from InDesign by processing files from hot folders. The software offers layer versioning, preflighting, variable file name, export as single pages and other powerful features. The new version now fully supports the editorial InCopy workflow by allowing to auto-update links in imported InCopy documents.

Toronto (ON), Canada — Zevrix Solutions today announces the release of Output Factory Server 1.2.14, a feature update to its solution to automate printing, exporting and post-processing from Adobe InDesign. Developed originally for a major magazine publisher in the United States to free up their operator computers from outputting InDesign files, the software automates InDesign workflow by processing files from watched hot folders.

The new version now fully supports the editorial InCopy workflow that lets writers, editors, and designers work simultaneously on the same InDesign document, without overwriting each other’s work. The update addresses an issue which prevented from processing InDesign documents with modified links in imported InCopy files.

“Output Factory Server is an extremely useful utility for a busy production facility or advertising agency”, writes David Creamer in Layers magazine, “It can save lots of time – which equates to money.”

Under the Output Factory Server workflow, production artists, prepress operators and designers simply copy InDesign jobs to hot folders that reside on a network. Users can create hot folders for different output targets such as hi-res PDF, large format printing, Flash files and so on. The software offers the following key features:

Print and export InDesign files automatically from hot folders
-Supports print, PDF, PostScript, TIFF, EPUB and other formats
Automatic email notifications
Export InDesign files as single pages
-Layer versioning
-Variable output file names
-Preflight files before output
-Serve unlimited users on a network

Pricing and Availability:
Output Factory Server can be purchased from Zevrix web site for US$699.95, as well as from authorized resellers. Trial is also available for download. BatchOutput Server users can upgrade for $350. Output Factory Server runs on Mac OS X 10.7-10.11 and works with Adobe InDesign CS5-CC 2015.

About Zevrix Solutions
Located in Toronto, Canada, Zevrix Solutions provides productivity solutions for Adobe Creative Suite software, PDF and graphic file diagnostics, file delivery and Microsoft Office on Mac OS. Zevrix Solutions is dedicated to helping professionals achieve more while doing less through automating their everyday tasks, producing error-free documents, saving disk space and cutting production costs. For more information, visit http://www.zevrix.com.

Contact:
Leo Revzin
Owner
Zevrix Solutions
105 McCAUL St, Suite 301
Toronto Ontario M5T 2X4 Canada
858-206-0607
media@zevrix.com

Solutions for Adobe InDesign & the Graphics Industry

Americana/ Alt-Country Group, Angie and the Deserters set to Release New Single, “Country Radio” out May 20, 2016!

Upcoming Blood Like Wine EP Schedule for July 8th!

Los Angeles, CA, May 19, 2016 – Southern California based singer-songwriter, Angie Bruyere of Angie and the Deserters announces the worldwide digital release of her new single “Country Radio” out May 20, 2016. The alt-country vocalist returns with a highly anticipated refreshing, new Americana sound going back to her roots and a first taste of her new EP, Blood Like Wine scheduled for July 8th release.

View/Stream New Single: Http://Bit.Ly/1S8H9Nf

Country Radio,” along with the rest of the tracks off of Blood Like Wine, were recorded in the famous Castle Recording Studios in Nashville, TN with well-known country producer Jeff Huskins (Keith Urban, Carrie Underwood, Clint Black, Shania Twain). With her stirring, soulful vocals, Angie discusses a sparking infatuation with a prospective lover. Bruyere’s rasp and rawness is what shines through this upbeat, edgy Americana single.

In her youth, Angie Bruyere began songwriting when she started creating music out of her poetry. Known as a dynamic performer, Angie has played in some of Southern California’s premier venues such as Pappy and Harriet’s, Whisky a Go Go, The Troubadour, The Roxy and The Mint. In addition, Bruyere has toured across the United States, through Italy and the rest of Europe. Angie looks forward to continue her touring in support of her Blood Like Wine EP.

The six-song release, Blood Like Wine, will be followed by an additional EP, which includes the second half of Angie’s Nashville recordings and will be released later this year.

In Nashville, Bruyere was fortunate to work with renowned musicians such as; Troy Lancaster (Loretta Lynn, Tim McGraw, Taylor Swift), Aubrie Haynie (Blake Shelton, Hank Williams Jr., Merle Haggard), Scott Sanders (Kenny Chesney, Taylor Swift, Alan Jackson), John Willis (Johnny Cash, Van Morrison, Kenny Rogers), Kevin “Swine” Grant (Willie Nelson, Linda Rondstat, Toby Keith), Fred Eltringham (Miranda Lambert, Keith Urban, Sheryl Crow), Evan Hutchings, Dave Doran and mastered by legendary and Grammy Winning, Bob Ludwig (Rolling Stones, Led Zeppelin, Jimi Hendrix).

In 2014, Angie released West of the Night, which was followed by a Fender sponsorship that featured Angie as Fender’s artist of the month. Along with, two fender sessions of her “Goodbyes” and “Mason Jar” singles.

“Bruyere’s sultry voice stood out, as she possesses a distinctive purr that is both sweet and dangerous at the same time.”-Fender

For More Information Please Visit: http://www.angieandthedeserters.com/

Contact:
Chip Schutzman
Miles High Productions
P.O. Box 93157
Hollywood, CA 90093
323 806-0400
http://www.mileshighproductions.com

Future Electronics Promotes TDK’s EPCOS Components for Energy Transient Protection

Pointe Claire, Quebec (realtimepressrelease) May 20, 2016 – Future Electronics, a global leading distributor of electronic components founded in 1968 by Robert Miller, recently announced immediate shipping availability of EPCOS components from TDK, for energy transient protection.

EPCOS components from TDK deliver high energy transient protection, ESD protection, and thermal management. TDK’s EPCOS components offer extended life, enhanced system reliability, and reduced maintenance.

In addition to protection devices such as GDTs (gas discharge tubes), metal oxide varistors, and thermistors, TDK also offers EPCOS capacitors, inductors and chokes for LED lighting systems.

For more information about TDK, energy transient protection, and EPCOS components available through Future Electronics, visit www.FutureElectronics.com

About Future Electronics

Future Electronics is a global leader in electronics distribution, ranking 3rd in component sales worldwide, with an impressive reputation for developing efficient, comprehensive global supply chain solutions. Founded in 1968 by Robert Miller, President, Future Electronics has established itself as one of the most innovative organizations in the industry today, with 5,000 employees in 169 offices in 44 countries around the world. Future Electronics is globally integrated, with one worldwide IT infrastructure providing real-time inventory availability and access, while enabling full integration of its operations, sales and marketing worldwide. Offering the highest level of service, the most advanced engineering capabilities and technical solutions through all stages of the design-production cycle, and the largest available-to-sell inventory in the world, Future’s mission is always to Delight the Customer®. For more information, visit www.FutureElectronics.com.

Media Contact

Martin H. Gordon
Director, Corporate Communications
FUTURE ELECTRONICS
www.FutureElectronics.com
514-694-7710 (ext. 2236)
Fax: 514-630-2671
martin.gordon@FutureElectronics.com

###

Fusion Art is Now Accepting Submissions for its July 2016 International Online Juried Art Exhibition, “Red, White & Blue”

Fusion Art is pleased to announce it is now accepting submissions for “Red, White & Blue,” its July 2016 international online juried art exhibition.

Palm Springs, CA, USA — Fusion Art is pleased to announce it is now accepting submissions for “Red, White & Blue,” its July 2016 international online juried art exhibition.

In honor of the United States’ Independence Day holiday during the month of July, Fusion Art is celebrating the colors Red, White & Blue. For this competition artists and photographers are encouraged to share their artistic vision using the colors Red, White & Blue. The artwork does not have to be patriotic in nature. It can include one or two or all of the colors and can be any theme or subject matter in any of the acceptable mediums. The artwork can range from realism to surrealism to abstraction.

The competition is open to artists worldwide and all artists, regardless of location or experience level, are encouraged to participate. Cash prizes will be awarded in two categories – “Traditional” Art and “Digital Art & Photography” and the Best in Show winners receive an invitation to participate in Fusion Art’s group exhibition in Palm Springs, CA in November 2016. The deadline to apply is June 25, 2016.

Each month Fusion Art hosts uniquely themed art competitions and exhibitions. Both winners and finalists are provided with worldwide exposure, by having their work promoted through Fusion Art’s website, in 70+ press release announcements, email marketing, online event calendars, art news websites and through the gallery’s social media outlets. The gallery’s objective is to promote the artists, worldwide, to art professionals, gallerists, collectors and buyers.

Founded by Award winning artist, Chris Hoffman, Fusion Art was envisioned and formed out of a passion for art and the artists who create it. The website promotes and connects new, emerging and established artists with collectors and art enthusiasts, while offering the opportunity to participate in art competitions and experiences.

Fusion Art just recently opened its “brick and mortar” gallery in Palm Springs and is preparing for its inaugural group show for the online competition’s Best in Show winners in November 2016.

Artists who are interested in submitting their artwork for consideration should visit Fusion Art’s website for full competition guidelines: http://www.fusionartps.com/red-white-blue-july-2016.

Media Contact:
Valerie Hoffman
Fusion Art
2658 S. Cherokee Way
Palm Springs, CA 92264
(Mailing Address: PO Box 4236
Palm Springs, CA 92263)
760-832-7568
competitions@fusionartps.com

Home

Future Electronics and President Robert Miller Support National Denim Day to Fight Breast Cancer

Pointe Claire, Quebec (realtimepressrelease) May 19, 2016 – Future Electronics, a global leading distributor of electronic components founded in Montreal, Quebec, Canada in 1968 by Robert Miller, recently participated in National Denim Day on Tuesday, May 10, to help raise funds in the fight against breast cancer.

National Denim Day is an annual event to raise funds and awareness in the battle against breast cancer. National Denim Day is The Cure Foundation’s main fundraising event, whereby employees make a donation in exchange for being able to wear jeans to work that day.

Future Electronics and President Robert Miller encouraged each participating employee to donate a minimum of $5; every employee who made a donation of any amount to benefit this worthwhile cause was invited to wear denim and was also given a pink ribbon to wear as a show of support.

For more information about Future Electronics, visit: www.FutureElectronics.com

About Future Electronics

Future Electronics is a global leader in electronics distribution, ranking 3rd in component sales worldwide, with an impressive reputation for developing efficient, comprehensive global supply chain solutions. Founded in 1968 by Robert Miller, President, Future Electronics has established itself as one of the most innovative organizations in the industry today, with 5,000 employees in 169 offices in 44 countries around the world. Future Electronics is globally integrated, with one worldwide IT infrastructure providing real-time inventory availability and access, while enabling full integration of its operations, sales and marketing worldwide. Offering the highest level of service, the most advanced engineering capabilities and technical solutions through all stages of the design-production cycle, and the largest available-to-sell inventory in the world, Future’s mission is always to Delight the Customer®. For more information, visit www.FutureElectronics.com.

Media Contact

Martin H. Gordon
Director, Corporate Communications
FUTURE ELECTRONICS
www.FutureElectronics.com
514-694-7710 (ext. 2236)
Fax: 514-630-2671
martin.gordon@FutureElectronics.com

###

Fulham ThoroLED AC LED Retrofit Kits Receive ENERGY STAR® Certification

New ENERGY STAR Certification Simplifies Testing Process and Reduces Costs for Luminaire Makers Using Fulham’s AC Direct Drive LED Light Engines.

Hawthorne, CA, USA — Fulham Co., Inc. (http://www.fulham.com), a leading supplier of lighting components and electronics for commercial and specialty applications, today announced that three models of its AC-powered ThoroLED LED Retrofit Kits have been tested and certified as ENERGY STAR® Luminaire 2.0 compliant.

The three non-dimming AC LED retrofit kits are designed for ceiling and wall luminaires and are available in three power levels: 10W (model TJT120010AC), 15W (model TJT120015AC) and 25W (model TJT120025AC). The AC units are ideally suited to replace the original lamps in wall sconces and common ceiling lights for field installation or as factory retrofits, and they offer at least twice the lumens per watt as fluorescent lamps. The three units also are cULus classified and because they are ENERGY STAR certified, are eligible for a number of energy rebate programs.

ENERGY STAR certification assures luminaire manufacturers that components have already been tested for photometric life and electric performance by an EPA-recognized laboratory. Using ENERGY STAR certified products reduces both testing costs and time required for certification of new luminaires. It also ensures that new luminaires will be eligible for ENERGY STAR rebates for installers where available. Fulham anticipates receiving similar certification for additional retrofit kits in the near future.

“We are seeing an increasing demand for LED retrofit kits as more building designers and managers seek out better quality lighting solutions that save them money,” said Russ Sharer, Vice President of Global Marketing for Fulham. “Retrofitting existing luminaires to LEDs not only saves on power, but also on maintenance since LEDs last more than 10 times longer than fluorescents. Having ENERGY STAR certification for our retrofit kits gives our customers assurance that they can deliver energy-saving lighting without compromising on the quality of light or the light fixture.”

Fulham’s ThoroLED Retrofit Kits are field installable and designed to simplify conversion of existing light luminaires to long-lasting, energy-efficient LED luminaires that deliver twice the lumens of fluorescent lights with more even lighting for fewer shadows. Using LED technology provides better quality light in a long-lasting package that eliminates the need for bulb replacement. And the ThoroLED Retrofit Kits are field installable in minutes, easily replacing existing light luminaires, and they include thermal management and heat dissipation to extend the operational life of the LEDs.

For more information about Fulham’s complete line of LED engines, drivers, and modules please visit http://www.fulham.com/product-systems/led-systems.

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, sustainable commercial lighting components and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the U.K., China, India and the UAE. For more information, visit http://www.fulham.com.

Media Contact:
Andy Firchau
Marketing Manager
Fulham Co., Inc.
Phone: +1 (323) 779-2980, ext. 1252
afirchau@fulham.com

Homepage

Gartner Selects Netswitch as Representative of New Breed of Cyber-Security Managed Detection and Response Vendors

The Gartner Group has just issued a new market guide for Cyber-Security services describing what it is calling “Managed Detection and Response” and naming Netswitch Technology as a market representative provider in the space.

South San Francisco, CA, May 17, 2016 – The Gartner Group has just issued a new market guide for Cyber-Security services describing what it is calling “Managed Detection and Response” and naming Netswitch Technology as a market representative provider in the space.

The report, targeted to security leaders and available to Gartner subscribers was authored by senior Gartner security analysts, Toby Bussa, Craig Lawson and Kelly M. Kavanagh, identifies new service providers that are emerging to support organizations seeking to improve their threat detection and incident response capabilities.

“We are delighted that Gartner has included us in this category of market leaders along with Cisco, Raytheon and FireEye”, says Steve King, COO and Chief Security Officer of Netswitch. “Our unique SaaS offering is based on our Securli Advanced Threat Protection platform and our SecurliXF extended threat intelligence service. This service correlates disparate data feeds from a variety of sources both public and proprietary to provide predictive threat intelligence along with our monitoring, incident response and remediation capabilities. The result is actionable threat intelligence delivered on a 24×7 clock.”

As Marc van Zadelhoff, the head of IBM Security recently pointed out, “Even if the industry was able to fill the estimated 1.5 million open cyber security jobs by 2020, we’d still have a skills crisis in security.” Managed Detection and Response providers fill that critical security skills gap by providing expert detection and remediation service to deal with today’s increasingly complex threats. Private businesses and public companies will find it challenging to deal with these threats alone.

Netswitch’s business model allows them to manage the monitoring tools selected by the customer and through their three partner SOCs – two in the U.S. and one in Hong Kong – provide 24/7 monitoring, incident investigation, alerting and remediation services with a 15-minute response SLA. Netswitch is predominantly used by midsize organizations today, but is also targeting enterprises with its MDR service. The service is priced on the number of log sources and the security monitoring tools selected from the Netswitch technology portfolio.

Gartner points out that by 2020, 15% of midsize and enterprise organizations will be using services like MDR, up from less than 1% today. And, by 2020, 50% of worldwide MSSPs will offer MDR-type services.

Gartner recommends that IT security leaders should
1) Use MDR services to augment existing security monitoring capabilities to address gaps in advanced threat detection and incident response before investing in more security monitoring tools (e.g., security information and event management [SIEM], network, and host-threat detection), and associated staff and expertise.
2) Consider managed security service providers (MSSPs) that offer MDR-like services when device management and compliance use cases are required.
3) Look for MDR providers who can incorporate your existing security controls in the scope of their services to improve context and coverage.

Security leaders should use this research to understand the MDR services market and it’s fit for their security monitoring and incident response requirements.

ABOUT NETSWITCH
Netswitch is a global cyber-security solutions provider, serving businesses of all sizes through its award-winning Managed Detection and Response platform.

The SECURLI® Integrated Security Technologies are in use at over 3,000 client sites around the world providing managed intrusion detection and prevention, advanced behavioral analytics, preemptive breach detection, monitored and managed web firewalls and gateways, security information and event management, managed incident response and remediation and complete audit-ready regulatory compliance.
For more information, please visit us at http://www.netswitch.net/

Contact:
Marci Bracco Cain
Chatterbox PR
Salinas, CA 93901
(831) 747-7455

Where We’re Going