Category Archives: Industrial

Avoiding the Perils of Dangerous Car Modifications

TorqueCars http://www.torquecars.com, one of the UK’s leading online car modding communities today launched an awareness campaign to highlight the dangers of poor quality DIY car modifications by inexperienced owners.

We see many modified cars that are downright dangerous or at least going to be unreliable. It seems that lots of car owners with minimal knowledge are making changes to their cars without realising the implications. By highlighting these problems TorqueCars hope to minimise the negative impact created by these low budget, poor quality modified cars, and focus on a professional approach to car modification.

It only takes a few high profile incidents involving poorly modified cars before the clamour is raised for legislation outlawing all modifications or restricting the choice of modifications people can do.

Some young drivers seem to think that the more noise the car makes the faster it goes. Experience proves this to be incorrect and often these large exhausts and noisy induction kits have a negative effect on the cars performance and power.

One particular area of concern is with car electrics. Inexperienced DIYers will often overload circuits or hack into wires for power without making proper provisions for vibrations wear and adequate electrical insulation. These can often short out potentially causing a fire or at least creating a breakdown.

The most common electrical mistake is putting a wire straight through a bulk head without placing a rubber grommet around the wire to shield it from rubbing on the bulk head and wearing through.

A holistic approach to car modification is required where increased power is matched with up rated braking and handling. Dropping a 2.0 Turbo engine into a car which originally had a much smaller engine will offer a dramatic power hike but the brakes and suspension will be unable to handle this causing a potentially dangerous situation.

The main motivation for modifying a car is to maximise the drivers enjoyment of the vehicle. Most modifications merely release the full potential of a car where manufacturers have detuned or restricted the car in some way for economic or reputational reasons.

It is also fair to assume that each driver has their own personal preferences when it comes to a cars power band, handling characteristics and the aesthetic design of their car.

A well modified car should be safer than the standard unmodified one due to the stronger or uprated parts introduced. Braking distances can be dramatically shortened, the risk of skidding on a deceptive bend or corner or losing control should also be lower.

By increasing an engines efficiency there is often an additional saving in fuel consumption. This fact is particularly true when it comes to tuning modern turbo diesel engines.

It’s not just poorly modified cars that present a danger; poorly maintained cars are just as big a risk. According to TorqueCars senior partner Waynne Smith, “if you walk around any public car park you will find many cars will illegal tyres. The tread depth will be below the legal minimum or there will be damage to the sidewall of the tyre. We try hard to promote responsible car ownership to our members and readers of our articles.”

The forums at TorqueCars are a great place to go to discuss your car tuning project in details with experienced car modifiers and enthusiasts from around the world. By garnering as much information as you can you’ll be better placed to avoid the common pitfalls associated with modified cars.

http://www.torquecars.com/news/tuning-mistakes.php

Contact Details: TorqueCars
Delpech suite,
The Limes Business center,
6 Broad Street,
Deal
CT14 6ER
0845 4678197
http://www.torquecars.com

Baltimore Expands CDL Owner Operator Driver Jobs With New Terminal Immediate Hiring

GHI is one of the largest flatbed transportation services in the Northeast, and they are holding an open house for immediate hiring at their new Baltimore, MD Terminal. Positions are open for CDL Class A Company Drivers, Owner Operators, Yard Jockeys, and Tarpers.

Company Drivers: Great pay and benefit packages. Must be a minimum of 23 years of age, and have a CDL Class A License.

Owner Operators: Offers excellent earning potentials and a pay structure designed to maximize your profit. Must have two or more years’ experience driving tractor-trailers and no more than three moving violations on your current MVR.

Yard Jockeys and Tarpers: Work close to home for one of the best companies in the industry with steady work year round.

There is a large influx of job opportunities in the transportation industry, and Baltimore has become one of the highest volume transportation hubs in the region. The new terminal is located at 2301 S. Newkirk St. Baltimore, MD 21124 and is staffing for their terminal expansion and it is best to call for an appointment to assure you get the job position of your choice. If you are interested in local steady work year round with great pay and benefits, call to schedule an appointment at their open house job fair at 1-800-342-5115 Ext. 376.

Job Fair Details:
o July 14th
o Time: 8:00 am until 12:00 pm
o Bestwestern Plus Hotel and Conference Center
o 5625 O’Donnel Street
o Baltimore, MD 21224

If you meet the qualifications, call to schedule your appointment today! 1-800-342-5115 ext. 376.

About GHI
George Hildebrandt Inc. specializes in providing both dedicated and for-hire services. They have a fleet of over 100 trucks and service customers throughout the Middle Atlantic and New England states, parts of the Midwest, and the Canadian provinces of Ontario and Quebec. GHI understands that their drivers are the most critical link between the company and the customers. The qualification standards exceed DOT requirements and when combined with industry leading technology support, the results are high customer satisfaction and world-class performance. GHI provides safe, well-maintained equipment outfitted with modern amenities and on-board mobile communications. They understand and value family time and make sure you are home most nights and weekends.

Contact Details: Bestwestern Plus Hotel and Conference Center (Job Fair)
5625 O’Donnel Street
Baltimore, MD 21224
1-800-342-5115 ext. 376
www.ghitrucking.com

Mettler-Toledo India Unveils New Meters for Liquid Density & Refractive Index Useful for Flavours & Fragrances Measurement

Mumbai, 24th May, 2012: Mettler-Toledo India, a wholly subsidiary of Mettler-Toledo Inc (NYSEMTD), announced the launching of its new LiquiPhysics™ Excellence instruments in India for density and refractive index determinations within the flavours and fragrances.

 

The new LiquiPhysics™ Excellence density and refractometers are simple to operate, sophisticated and versatile making them the ideal tools to deal easily with the high variety of products and parameters in the flavours and fragrances industry environment.

 

The One ClickTM user interface allows quick, simple and direct access to all routine tasks and provides clear user information with easy shortcut buttons to start routine tasks immediately. Every operator has a personalized home screen, shortcuts and operation language. A unique product/method concept fulfils even the most particular requirements without having to alter any settings.  Powerful sampling and automation units can completely automate measurement and cleaning procedures whilst sophisticated barcode functions conveniently input sample data and automatically ensure the right measurement method is always chosen.

 

The highly flexible concept, with full modularity, protects investments and facilitates the combination of density with refracto- colour-and/or pH-meters. This supports the simple expansion of measuring systems as and when additional needs arise enabling the simultaneous determination of multiple parameters. A smooth and seamless LIMS/SAP integration with LabX™ PC software organizes comprehensive sample lists containing all relevant data in order to fully automate quality control processes.

 

“The New LiquiPhysics™ instruments set a new standard in quality control of liquids. One can easily get all the required information such as pH, refractive Index, density and color at one glance by automation” said Mr. Pradeep Palshikar, Business Manager- AnaChem, Mettler-Toledo India.

 

Complete and secure traceability is only a click away with LabX™ PC software in order to easily, yet fully, comply with the many regulatory demands facing the flavour and fragrance industry. User identification and access control is performed in a most secure and fast way with biometric identification via a finger print reader. Sophisticated barcode functions quickly and conveniently input sample data and automatically ensure the right measurement method is always chosen. Comprehensive test and error detection functions, along with automatic adjustment verifications, offer tight security ensuring the instruments consistently provide precise results.

 

 

About Mettler-Toledo India:

 

Mettler-Toledo India Pvt. Ltd., a wholly subsidiary of Mettler-Toledo Inc. (NYSEMTD), started its operations in India in 1998. With its base in Mumbai and eleven branches across India, Mettler-Toledo India is a leading player catering to the demand of Indian industries for high-technology precision and analytical instruments used in various labs and automation processes.

 

Mettler-Toledo Inc. is a leading global supplier of precision instruments and is the world’s largest manufacturer and marketer of weighing instruments for use in laboratory, industrial and food retailing applications. The Company also holds top-three market positions in several related analytical instruments markets and is a leading provider of automated chemistry systems used in drug and chemical compound discovery and development. In addition, METTLER TOLEDO is the world’s largest manufacturer and marketer of metal detection systems used in production and packaging. Additional information about METTLER TOLEDO can be found on its website www.mt.com/liquiphysics

 

 

 

 

 

For more details, contact:

Sanjiv Arora

sanjiv@deeshapr.com

+91-22-32713357

Deesha Communications

http://www.deeshapr.com

iPhone-iPad App Brings Mobile Technology To Construction Industry

If you have ever been involved in a construction project, chances are that you have celebrated the day that you can walk through and create a punch list of items that await final completion. Construction Punch Lists mobile application by Moore Quality Apps now allows anyone to create and e-mail a professional punch list directly from the job site.

“For years the construction industry has used pen and paper to create punch lists and the process may take several days before it’s distributed. From home building to commercial construction, mobile technology now allows the process to be easier and faster” said Josh Moore, owner of Moore Quality Apps. “I recently used the Construction Punch Lists app on a large office project and realized that this dream had become a reality.”

Construction Punch Lists by Moore Quality Apps is now available worldwide on iTunes. Features include multiple project lists, integrating pictures and contacts directly from the device, and sorting items before sending. The application can be used on an iPhone or iPad and can be purchased in English and Español. For more information, visit www.constructionpunchlists.com.

###

Inventory Management Specialist Phillip Slater Releases New e-Book The Optimization Trap

In a move that capitalizes on technology’s ability to provide written works through mobile devices and financially supports community philanthropies, The Optimization Trap has been recently released exclusively in digital format. Written by inventory management expert Phillip Slater, the book is now available on Kindle, Kobo, Nook, iPad, Sony, and other e-readers. Mr. Slater’s previous books were published in hard copy by Industrial Press, New York, the world’s oldest industrial education publisher.

Mr. Slater will donate 100% of the proceeds from this e-Book to the Initiate Action Community Fund, a sub fund of The Australian Communities Foundation (ACF), that Phillip and Mercedes Slater established in 2011 to support educational initiatives and causes.  The Australian Community Foundation (previously Melbourne Community Foundation) aims to generate and distribute philanthropic resources to address emerging social issues and to meet the needs of its communities.

“Digitally publishing The Optimization Trap achieves many goals for me: the digital format not only provides readers with more accessibility, but it costs less to purchase. Using a digital format also allows us to channel 100% of the proceeds into our Initiate Action Community Fund which supports various educational causes through ACF,” said Mr. Slater.

Following years of helping companies improve their profit and reduce working capital, Mr. Slater wrote The Optimization Trap to help managers understand why optimization programs often fail to achieve their intended results. The book exposes the pitfalls of optimization programs while offering viable solutions. Based on Mr. Slater’s years of experience in inventory management, he identifies optimization traps and illustrates how to remedy these and achieve peak performance in operations.

“Improving operational outcomes typically involves optimization. It is what managers do. However, sometimes when seeking to optimize, people take actions that, without realizing it, limit both their options and their results. This is what I call the Optimization Trap,” stated Mr. Slater. “How do you make sure that you don’t get caught in the optimization trap and, if you do, how do you get free? This book identifies the key principles to both identify and be free of the ‘trap’.”

Similar to best selling management books such as The Goal, Who Moved My Cheese, and Fish!, The Optimization Trap uses an easy to read narrative style. By using inventory management as the example, Mr. Slater is able to address familiar, realistic everyday scenarios faced by managers and discuss how to apply the principles for avoiding the Optimization Trap. This book speaks not just to inventory managers; its tips and principles are applicable to any situation where managers are seeking to achieve optimal performance in its operations.

For Kindle users, please access the ebook The Optimization Trap via Phillip Slater author’s page at Amazon.com: http://amzn.to/L9npFE

For PDF (PC or Mac), EPUB (iPad, Nook and most ebook readers) please visit:http://bit.ly/L9nusU

For more information about the Initiate Action Community Fund, go to:http://bit.ly/MhynZ1

For video of Mr. Slater summarizing a number of his books, including The Optimization Trap, please visit http://youtu.be/q762uyFFjWs

###

Chiller Noise No Longer Problem After Acoustifence Barrier Installed

Installation of a 24-foot noise barrier utilizing Acoustifence outdoor sound abatement material at the new Sheboygan Festival Foods store is complete, ending complaints from nearby residents over extreme levels of noise leaking from the store’s industrial refrigeration chillers into the community.

Folks in Sheboygen were celebrating when the popular Wisconsin-based Festival Foods grocery chain opened the 70,000 square foot mega store here on September 16, 2011. Less than two weeks later, the community’s warm welcome had grown icy as neighbors began to complain about noise from the store’s industrial refrigeration chiller that was so loud, it violated the city’s noise ordinance.

Festival Foods enlisted the help of Acoustical Engineer Eric Wolfram of Milwaukee-based Scott R. Riedel & Associates, LTD, who consulted with Acoustiblok’s Jay Boland to choose Acoustifence noise barrier material, a product of Acoustiblok, Inc. of Tampa Florida, to bring the decibel level down below the legal threshold and restore peace and quiet to the neighboring community.

When Wolfram first investigated the site in September, decibel readings ranged between 78.4 and 90.7, loud enough to be a risk for noise-related health problems to nearby residents and workers, had they been subjected to the noise over time. The Sheboygan Department of City Development demanded the level be reduced by at least five decibels, Wolfram said.

“The existing refrigeration pump and motor systems produce extreme noise levels,” Wolfram said. “This noise reverberates within the sheet-metal paneled enclosure interior and escapes through several different exhaust and ventilation openings.

“Additional noise was generated by the cooling and exhaust fans mounted above the enclosure.”

Working with sound consultants from Acoustiblok, Inc., Wolfram designed a two-step solution, creating a barrier with Acoustifence noise deadening material to block noise around the massive system, and incorporating another Acoustiblok product, QuietFiber, to help reduce sound from reflecting off of the taller adjacent building behind the chillers.

Minimal structural changes were required, as the ⅛- inch Acoustifence was easily attached to an existing chain link fence and the outdoor-rated QuietFiber with a perforated metal cover was capconed to the building.

The results were better than Wolfram had hoped, with decibel levels reduced to 57.3 the moment the barrier was in place – well below the City’s legal threshold, and more than 20 decibels lower than before the Acoustiblok products were installed. Neighbors are no longer bombarded with the irritating chiller noise, now replaced with the ordinary ambient sounds that existed before.

“Sounds from local traffic and roadways exceeded that of the compressor equipment after installation of the Acoustifence and QuietFiber products,” Wolfram said.

Lahnie Johnson, founder and president of Acoustiblok, Inc., applauded Festival Foods’ quick action in addressing the noise complaints right away, stating that the product combination was the perfect solution for this particular type of noise challenge.

“The Acoustifence and QuietFIber treatments were the perfect solution for the Festival Foods chiller noise, as both of these materials are designed to hold up in inclement weather, and as you can see from the results, they do their job well beyond everyone’s expectations,” Johnson said. “The Acoustifence and Quiet Fiber are also substantially less costly than attempting a structural enclosure solution.”

For more information on industrial noise solutions, visit the Acoustiblok website, Email sales@acoustiblok.com, or call 813-980-1400.

###

Acoustiblok Creates Damped, Expandable Acoustical Envelope in New York ITB Recording Studio

Acoustiblok noise abatement material was installed in the nearly completed Artist Workshop Studios recording facility, an in-the-box (ITB) studio designed and built by Artist Workshop Studios owner Tom Donofrio. Acoustiblok was chosen to provide a sound barrier for the small, 12 foot x 12 foot basement studio that could drop decibels levels within the space and provide a neutral acoustical environment for recording.

Donofrio, an electrical engineer, and musician who has built recording studios in the past using different sound deadening materials, chose Acoustiblok for his newest project after consulting with Marilyn Myers of Acoustiblok, Inc., because of its sound damping and noise blocking qualities, as well as its thin, flexible structure that adds no volume to walls within the studio space. Attached to the studs before drywall is hung, Acoustiblok performs without the need to add layers of rigid drywall or modified drywall, a method Donofrio used in the past with mixed results and significant floor space reduction.

“I was looking for a product that would lower the decibels in the studio without taking up any additional space,” Donofrio said. “I was able to achieve the neutral acoustics desired in the space, which makes me extremely happy.

“I didn’t want a sound quality that was too dead or too live, so the Acoustiblok turned out to be an excellent choice.”

Donofrio and a friend were able to hang the 3mm Acoustiblok on the newly framed stud walls within the studio space, including cutouts around a window and electric sockets, and seal the seams according to installation recommendations, all in less than four hours.

The Artist Workshop Studios recording space was built for Donofrio to indulge his own talents as an acoustical guitarist and vocalist, and to be made available to artists on a budget who need an affordable studio with high quality production equipment and the expertise of a seasoned technician to record a song or album.

“Acoustiblok is a perfect choice for establishing sound quality within a sound recording studio like this one,” said Lahnie Johnson, president and founder of Acoustiblok, Inc.

“Unlike additional drywall or other solid rigid materials used for sound reduction, the 1/8-inch heavy, limp Acoustiblok allows the room to be a damped, expandable acoustical envelope. As such, a studio or home theater has less reflection and actually sounds significantly better.”

###

Quiet Fiber® Used to Quiet Industrial Generator Noise at Galleria 360 in Santo Domingo

Installation of 18,000 square feet of non-fiberlass Quiet Fiber® noise absorbing material has been completed in the massive generator room of the newly constructed, 750,000 square foot Galleria 360 mall in Santo Domingo.

Quiet Fiber, a product of Acoustiblok, Inc. in Tampa, Florida, was installed on the ceiling and walls of the mall’s generator and substation rooms. These rooms house the industrial emergency generators necessary to keep power running in this coastal area of the Caribbean, plagued by frequent power outages.

The Galleria 360’s industrial generators, installed by Santa Domingo-based Edelca, are a staple in this island republic. Edelca owner Carlos Montos, Edelca consulted with Jay Boland of Acoustiblok, Inc., and used Quiet Fiber on the project after achieving excellent results with Quiet Fiber on a similar project at the La Sirna Superstore in the eastern coastal town of Higuey, Dominican Republic.

“Even though Quiet Fiber is not the least expensive product on the market, I keep coming back to it because the results beat all the competitors’ noise deadening products with double the noise insulating qualities,” Montos said. “The customer on this job wanted to install a double layer of a different product but I convinced him to try the Quiet Fiber.

“I’ve been designing and installing these emergency generators for 20 years, and I have never had the results from other noise abatement products that I have with Quiet Fiber, and now I’m trying to use it everywhere.”

Montos says noise from these industrial generators on which the island has become dependent in order to maintain consistent power is a major problem plaguing businesses and residential property owners when the generators are running. Not only is generator noise bad for business, but its constant drone can cause permanent hearing loss. Another important consideration in the selection of soundproofing material is its fire resistance.

Recently in Santo Domingo a serious fire started in a generator room, and the existing foam sound proofing material was a prime contributor. The fire caused Montos to search for a new fireproof solution. Quiet Fiber is fire resistant even at 2,000 degrees.

“The noise levels are almost unbearable, so you need to have an adequate level of soundproofing in place when they are running,” Montos said. “I always install noise absorbing material wherever I install my generators, and Quiet Fiber is the best soundproofing product we’ve ever used.”

Montos and his crew were able to easily cut the Quiet Fiber to fit around electric conduits, and secured the material to the walls and ceiling with standard insulation stick pins.

The sound deadening qualities of Quiet Fiber will help to protect the mall’s employees, and streams of tourists and local residents from the high volume industrial noise caused by the generators when they are operating.

Lahnie Johnson, president and founder of Acoustiblok, Inc., says that the application of Quiet Fiber in the Galleria 360 generator and substation rooms was exactly what was needed for addressing the high decibel, reverberant sound emanating from the concrete walls.

“Quiet Fiber was designed with this type of hot, humid environment in mind,” Johnson said. “When you’re addressing solid surface noise issues, which in this case with concrete walls, you need a product with proven maximum sound absorption, high temperature rating for fire blocking, and hydrophobic (resistant to moisture).”

###

The RoboShower™ Brings A Transforming Touch To Your Daily Shower

The RoboShower™ is a patent pending shower head system that was designed by Mr. Audie Norr, a local inventor and designer. The RoboShower™ aims to take showering and the relaxation that it can provide to another level.

The RoboShower™ is rectangular in design with over 20” double-wide adaptable and one-of-a-kind head. This is to ensure that practically anyone will be able to receive adequate coverage of water flow while showering. Inventor, Mr. Audie Norr, did however keep a host of body types and sizes in mind with the design, and equipped the RoboShower™ with the ability to go from rectangular to a triangle shape to allow users to be able to manipulate the RoboShower™ to best fit their coverage needs.

The RoboShower™ also comes packaged with a shower Extension Arm and plumbers Thread Seal tape for security and mounting. The colors of choice for the RoboShower™ are silver and blue.

RoboShower™ inventor, Mr. Audie Norr, had two primary goals in mind when designing the RoboShower™. He wanted to provide the general public a shower system that gives options for waterfall coverage with the ever growing differentiation of body sizes of consumers today, as well as provide a shower system that was eco-conscious by saving on overall water usage.

When asked how he ultimately feels about the RoboShower™, Mr. Norr, states:

“When you buy your first RoboShower™, and I say first because you will fall in love with the ease in how your shower water cascades all over you, you will become a lifetime fan. But more importantly, you will be standing in the shower beholding a Patent pending, adaptable, and only one of its kind shower system in the world, how cool is that?”

Mr. Audie Norr is a Dallas, Texas based inventor and designer. He is continuously committed to inventing and presenting to the public products that are unrivaled, eco-conscious, and that deliver a solution to an ever growing concern from the general public.

For Additional Media Inquiries, Please Contact: Mr. Audie Norr, Inventor and Designer for RoboShower™ or visit the website – http://www.buyroboshower.com/.

###

The Next 4 Billion & SCINET CORPORATION: Worldwide Innovation Impact!

The worldwide and unprecedented impact achieved by SCiNet Corporation & the World Trade System (WTS) is proof that millions of people are ready to fight for life, intelligence and freedom. 72% of the world population is considered ‘poor’, but a recent study prepared by The World Resources Institute reveals that 4.7 billion people have the purchasing power of 3.7 billion euro per day! The title of the report reads ‘The Next 4 Billion’ (the next four billion: business strategy and market).
The report is concerning the population of millions of men and women of Asia, Africa, Eastern Europe, Latin America and the Caribbean, whose income is below poverty level of the western societies, but which in the aggregate represent an extraordinary economic potential.

SCiNet & WTS Corporation is installing new assembly workshops in different regions worldwide, which are included within ‘The Next 4 Billion’, for the mass production of its innovative production mini-plants inside mobile containers. The mobile production mini-plants that are mounted in these assembly workshops are intended for developing countries, offering therein all kinds of products and basic services: from food preparation or household goods, footwear or clothing articles to water purification and primary health care.

The production mini-plants in mobile containers comprise the only system in the world that can supply up to 6 basic necessity articles at a price as low as one dollar per day.

Furthermore, all the assembly plants will operate connected to the World Trade System, a database that provides access to 60 million referrals to merchandise, raw materials, products and services worldwide, through digital certificates for trading.

SCiNet & WTS Corporation: www.scinet-corp.com
SCINET Foundation: www.scfoundation.eu

###