Category Archives: Industrial

A-Quick Pick Crane Service Provides Crawler Crane on Stamford, CT Project

A-Quick Pick Crane Service CT recently started to set a parking garage on the corner of Washington Blvd and Pulaski St in Stamford, CT. The parking garage is part of the 20 story Gateway Office project. Quick Pick and Baker Concrete chose Manitowoc’s 888 crawler crane to perform the heavy picks, and it is scheduled to be there over the next year.

The Manitowoc 888 on site is a 230 ton crawler crane with 270′ of tip height which includes a 40′ offset jib.

A-Quick Pick Crane Service is based out of Derby, CT and provides all trades in the construction industry with hydraulic truck cranes, rough terrain cranes, crawler cranes, tower cranes, rigging, trucking, and industrial storage.

Contact Details: A-Quick Pick Crane Service CT
205 Water St
Derby, CT 06418
203-924-2000
http://www.aquickpickcrane.com

Waterford Dryer Vent Cleaning Wizard Commemorates Fire Prevention Month

Dryer fire prevention and energy savings are the Wizard’s main focus all year with increased effort during Fire Prevention Month in October.

Waterford, CA (USA), October 18th, 2012 — The Waterford Dryer Vent Cleaning Wizard observes National Fire Prevention Month in October by increasing his efforts to promote dryer fire prevention and energy savings. This is the time of year when the frequency of home fires and carbon monoxide accidents increases so residents should double check all gas appliances to be sure they are venting properly. Gas dryers need proper venting to avoid carbon monoxide accidents and house fires.

Over 17,000 dryer fires occur each year with dryer lint accumulation being the number one cause. Dryer fires are easily preventable with routine maintenance to remove lint build-up from inside the dryer and dryer vent system. Here are some dryer maintenance tips to help prevent dryer related fires:

* Clean the lint screen or filter before or after each load of laundry

* Make sure your dryer vent system meets city, state and manufacturer’s safety codes

* Replace plastic or flexible foil systems with semi-rigid or sold metal material

* Keep the dryer lint screen clean and wash it every few months with soap and water to remove residue from fabric softener sheets

* Have professional dryer vent lint cleaning done each year

* Don’t store combustibles, chemical cleaning products or chemical soaked rags near your clothes dryer or other gas appliances

* Do not leave the house or go to sleep when the dryer is running

* Check the dryer vent outside often for lint build up, blockage, damage or freezing

Professional dryer vent cleaning is the best way to eliminate a fire hazard and improve dryer performance. A certified dryer exhaust technician (http://www.californiadryerguy.com/) will also clean the interior of the clothes dryer chassis and inspect the belts and rollers for wear. Worn belts can cause the drum to become unbalanced and rub against other parts, causing the dryer to throw sparks which can easily ignite lint that is built up in the dryer vent system. This is one example of how a dryer fire starts.

Dryer vent cleaning removes the fuel so if the dryer does throw a spark, there is nothing to ignite, and a solid metal dryer duct is likely to contain the spark until it burns itself out. The plastic or vinyl could catch fire from sparks. This is why manufacturers and building codes do not allow plastic or vinyl for a dryer vent system.

James Smith owns Dryer Vent Wizard, specializing in commercial and residential dryer vent cleaning, repair and new dryer vent installation. He encourages everyone to have a dryer vent inspection and look for other fire hazards in the home while observing National Fire Prevention Month in October. Visit http://dryerventcleaningwaterford.blogspot.com/ to learn more.

About Dryer Vent Wizard:
Dryer Vent Wizard is a member of the National Fire Protection Association and the largest chain of dryer vent cleaning, repair, replacement and alternation specialists in the U.S. with nearly 60 franchisees in major markets. Dryer Vent Wizard franchisees work to promote public awareness on the importance of dryer vent cleaning to prevent dryer fires and save energy. Consumer education while making clothes dryers safer and greener are the main focus of DVW franchisees. Dryer Vent Wizard was founded in 2004 by Dave Lavalle who is also the founder of the Mr. Handyman franchise.

Dryer Vent Wizard provides dryer vent cleaning, dryer vent repair, dryer vent installation, dryer vent inspections and all dryer vent services for homes and businesses in Stanislaus County, Modesto, Oakdale, Riverbank, Waterford, Ceres, Turlock, Patterson, Grayson, Hughson, Newman, Salida, Keyes, Denair, San Joaquin County, Tracy, Stockton, Manteca, Lodi, Lathrup, Escalon, Ripon, Livermore, Santa Clara County, Morgan Hill and neighboring cities and communities.

This press release was submitted by Right Now Marketing Group, LLC

Press & Media Contact:
James Smith
Dryer Vent Wizard – Greater Modesto, CA
PO Box 1363
Ceres, CA 95307
Local: 209-568-3834
Toll Free: 866-498-7233
jsmith@dryerventwizard.com
http://www.dryerventwizard.com

CSIA Certified in dryer exhaust services contractor license #943017

IL 1st Congressional District Cook County Voters Support Peloquin Suburban Preservation

The first election using the 1st Congressional Redistricted South Side of Chicago and their Southwest Suburbs extending into Will County has city voters crossing over to support the states suburban life style.

With 74% of the new district voters being from the original 1st district, many of original voters are pushing to preserve their weekend getaways in the suburbs and the continued expanse of the commuter train stations for their suburban and rural lifestyle.

City Folks are now realizing they’re far more dependent on their rural and suburban agriculture businesses and how city politics overlook the needs of the rural and suburban growth at their cost.

It’s a wake-up call for many in Cook County; with Will County positioned as one of the new “Agriculture Cross Roads Of America”, their grain export business offers significant growth in the emerging markets such as Viet Nam, Russia, and China, and that means more jobs, revenue for the state and lower costs for their districts agriculture needs.

This 1st Congressional Districts election is fast becoming the center stage for a nation, as Big City residents learn “Intermodal Growth” is the ticket to world competition, not a party ticket.

You simply cannot achieve Intermodal Growth for the agriculture business with the city politicians quest to keep the spend in the city at the expense of the state’s best opportunity to sustain and gain more jobs outside its original district. Here is a short video clip on Intermodal Job Growth.

As the 3rd largest city in the U.S., the voters are realizing they’re dismal job growth has been limited to their federally subsidized projects within the city versus rebuilding the city through better decisions on how to compete globally within the state.

A Win Win situation, without a solution for decades, it’s time for a change, and it starts with educating the people on how to best affect change, and why. There’s a need here, a need to turn things around before we lose the opportunity to reduce our state and nations overall deficit, which ultimately results in the loss of the federal funding we’ve grown to know as the way the City Politicians create more jobs.

The Don Peloquin Campaign for the 1st Congressional District supports growth through voter education. Many people are totally unaware that if Congress doesn’t pass the new Farm Bill, you may as well forget about the food stamp program with its $80 billion a year, or 80 percent of all spending in the $500 Billion Farm Bill. Our position is to grow globally with the best opportunities, and our suburbs and rural areas have the best potential of securing grants for jobs like the $6 million awarded to UW-Madison. That focuses on encouraging more farm-to-school programs like the Research, Education, Action and Policy Food Group’s farm-to-school program, which supplies area schools with fresh, locally produced fruits and vegetables. We need a well balanced spend to gain the maximum benefits for all.

The Time For Change Independent Voice:  Dedicated To Public Announcements That Affect Our Suburban and Rural Life. We simply state what’s before us from the eyes and ears of those affected.  Get Out And Vote For A Change, Visit www.peloquinforcongress.com and read for yourself.

Line Generators for Machine Vision Offer Improved Performance

Coherent Inc. (Santa Clara, CA) has introduced a new range of diode-laser based line generators which deliver enhanced flexibility, unique output optimization capabilities, and extended lifetimes. This series of new line generators, called the StingRay, will enable the construction of faster and more accurate machine vision systems that utilize 3D triangulation. The   StingRay series mates a diode laser with high performance electronics and precision, refractive optics for collimation and line generation covering the widest available range of fan angles. They also incorporate optional diffractive elements for creating complex output patterns.  StingRay models are available with output powers as high as 200 mW and at key wavelengths throughout the 450 nm to 1550 nm spectral range, including the popular 450 nm, 520 nm, 635 nm, and 660 nm lines.

StingRay lasers are the first to feature an industry leading, line intensity non-uniformity down to ±5% in a standard product. This high uniformity reduces the need for image post-processing, and translates directly into increased measurement speed and dimensional accuracy. StingRay lasers are also unique in offering external user focusable optics, which allow the laser line to be precisely optimized for the exact distance over which it is projected.  Additionally, the StingRay’s optomechanical design permits “dynamic line balancing,” enabling simple correction of any intensity bias in configurations where the laser must be used at off axis illumination angles. To further enhance usability, Stingray lasers also include an internal “health monitor” that indicates when a diode module is approaching end of life, thus allowing for planned replacement, and avoiding production downtime due to an unexpected failure.

About Coherent
Founded in 1966, Coherent, Inc. is a world leader in providing laser-based solutions such as laser cutters and laser measurement tools to the commercial and scientific research markets. Please direct any questions to Wallace Latimer, product line manager, at (503) 454-5826. For more information about Coherent, including product and financial updates, visit our website at http://www.Coherent.com.

IL 1st Congressional District Don Peloquin Voters Rush To Oust Bobby

The Republicans rush to derail the Metra’s $141 million Englewood Flyover Project hasn’t deterred the supporters of Don Peloquin; they’re climbing aboard his “Time For Change” campaign like a freight train.

Well know n for his hands on “let’s get this going attitude” and 25 productive years as mayor of Blue Island IL., the people of the newly redistricted 1 st Congressional District are rushing to get Bobby out. They’re not forgetful of how Don helped elect the first Hispanic and Afro-American Alderman for the city of Blue Island and they don’t want the Chicago City Politicians in charge of their districts destiny.

The most significant increase in Don’s voter support have been from many of those who are now affected by the redistricting. Many didn’t even realize the impact of it until Don woke them up with his “Unless you want all for Chicago and nothing for the suburbs and our rural areas, you’d had better get out and vote for a change. This rush to get Bobby out is more of a community need than a party vote.

New to the 1 st district, Will County residents are waking up fast and have become a large voice for the Don Peloquin “Time For Change” campaign. They don’t call it Insight, it’s hindsight, either way you slice it, being controlled by the “tentacles of Cook County politics” has never benefitted the suburban and rural areas, it’s like being robbed of our rights to live outside of the city. They even wrote and signed their own “Declaration of Independence” a Grass Roots “We The People” approach to nothing less than inciting a large scale riot in the Burbs in order to affect change.

The buzz and the chatter in some of the most highly read online communities likepatch.com is really heating up, and these pro Don Peloquin “Time For Change” discussions have taken on a flavor with some spice, like “Caliente”, it’s that hot.

It’s all about “Get Out And Vote” Know the Dates

Sept. 27:  First day mail ballots will be sent out

Oct. 9:  Last day to register to vote

Oct. 10:  First day of grace period registration and voting

Oct. 22: First day of early voting

Nov. 1: Last day to request a mail ballot, including military and overseas voters

Nov. 3: Last day of early voting; last day of grace period registration and voting

Nov. 4:  In-person absentee voting begins at the Clerk’s downtown Chicago office

Nov. 5:  Postmark deadline for absentee ballots; last day of in-person absentee voting at the Clerk’s downtown Chicago office and five suburban courthouse mini-centers

Nov. 6: General election

The Time For Change Independent Voice: Dedicated To Public Announcements That Affect Our Suburban and Rural Life. We simply state what’s before us from the eyes and ears of those affected. Get Out And Vote For A Change, Visit www.peloquinforcongress.com and read for yourself.

Five year print partnership for Balreed and global golf tournament

Balreed to provide all print technology and support to the Alfred Dunhill Links Championships for the fifth year running.

It may be known to many professional golfers as the ‘Home of Golf’ but to Balreed, St. Andrews Golf Course is a ‘home away from home’.

Once again Balreed has been chosen by the organisers of the world-renowned golf championship, played at St Andrews, as the official supplier of print and document technology.

This is the fifth year the event will rely on Balreed throughout the four-day tournament to provide and support print, copy and scan devices to media tents, European tour offices and tournament offices across all three courses that the event plays on.

The Alfred Dunhill Links Championship is a magnet for golfers from every corner of the world. It has a unique format and incorporates two separate competitions – an individual professional tournament for the world’s leading golfers with a US$5 million prize fund, and a team competition which features some of the most celebrated amateur golfers playing alongside the professionals.

Lee Westwood leads the British challenge for the title this year, and many of the world’s leading international players will be there to compete with him. In the amateur ranks the playing roster is sure to include some of the biggest names from the world of entertainment, sport and business. Michael Douglas, Samuel L Jackson, Morgan Freeman, Hugh Grant and Dennis Quaid have all shared the fairways in previous years with sporting greats like Sir Steve Redgrave, Sir Bobby Charlton, Boris Becker, Ian Botham, Ruud Gullit, Johan Cruyff and Nigel Mansell so expectations of the 2012 field are very high.

The tournament starts on Thursday 4th October and will play over three championship Scottish courses: The Old Course at St Andrews, Carnoustie and Kingsbarns.

Balreed’s support extends to all three courses and staff will be on site throughout the build-up and the tournament itself to help organisers prepare and manage the event.

Balreed’s Managing Director Robin Stanton-Gleaves commented: “When we were first selected to provide print support to the event five years ago we were thrilled, and even more so to be invited back the following year, it was a testament to our hard work. So to still be the chosen print partner five years later is a sincere compliment to all the Balreed team and we will continue to do what we have been doing which is careful planning and precise execution, providing service to the highest standard to ensure the tournament runs smoothly.”

About Balreed Digitec
Balreed Digitec is one of the UK’s leading independent providers of document and print technology and services. Established in 1977, Balreed is now one of the fastest growing solution providers in the industry, providing tailored systems which combine the best hardware and software technology from market leading manufacturers with Balreed’s unique pro-active remote managed service.

Contact Details: Gary Downey
Group Marketing Director
Balreed Digitec
Email: gary.downey@balreed.com
Mobile: 07889 411562
Website: http://www.balreed.com/

New Laser Cutting Machine Offers Faster Throughput and Higher Accuracy

 Coherent, Inc. (Santa Clara, CA) has extended its integrated laser tools product portfolio with its new META platform, offering improved performance and greater ease-of-use.  The META platform features a unibody chassis design. This rigid single weldment provides improved mechanical stability for the system, resulting in faster cutting speeds and better positioning repeatability. In addition, the cutting bed on META platform products has been enlarged to accommodate standard European sheet sizes (1.25 m x 1.25 m).

The control system has also been significantly upgraded with the help of our science laserresearchers. Specifically, the operator interface for META platform products has been changed to an industrial type controller. This is an ergonomic monitor/keyboard assembly that is directly mounted on the side of the chassis.  All interface cables for this system are now contained within the machine assembly, further enhancing its ruggedness and suitability for the increasingly industrial environments in which the platform is now being utilized.

Improvements have also been implemented in the META platform’s software. In particular, ease-of-use has been enhanced through a new, multilingual software interface, together with the implementation of greater system automation. Additionally, the system features automatic focus, advanced capacitive height sensing and a fully integrated machine vision system.

When configured with a Coherent 1 kW CO2 laser (Diamond E-1000), the META system offers unmatched flexibility, with the ability to process a wide range of both metals and non-metals, such as plastics, wood, fabrics, leather, paper and thin films. With this laser cutter tool, the system can readily cut stainless steel in thicknesses of up to 3mm, aluminum of up to 2 mm, and mild steel of up to 6 mm.

About Coherent
Founded in 1966, Coherent, Inc. is a world leader in providing laser-based solutions, such as laser measurement tools and diode modules to the commercial and scientific research markets. Please direct any questions regarding this press release to Ravi Pendse, product line manager at (408) 764-4556.  For more information about Coherent, including product and financial updates, visit our website at http://www.Coherent.com.

Mamtek US, Inc. Sucralose Manufacturing Facility, Brand New Equipment and Real Estate Assets to Be Sold by Heritage Global Partners via Live Global Webcast Auction October 24

Heritage Global Partners (“HGP”), a global leader in asset advisory and machinery auctions and a wholly owned subsidiary of Counsel RB Capital, today announced its upcoming auction of the sucralose (artificial sweeter) manufacturing facility, never- used heavy equipment, commercial real estate, and related assets of Mamtek US, Inc. (“Mamtek”), a subsidiary of Mamtek International. The sale is being conducted in partnership with Aaron Equipment Company, BidSpotter.com and Zimmer Real Estate Services.

The auction is slated for October 24, 2012 from 10 am PT to 1 pm PT. A two-day onsite preview of the manufacturing facility is available October 22-23 from 9:00 am CT to 4:00 pm CT at 1200 U.S. 24, Moberly, MO 65270.

A virtual data room (“VDR”) is available for bulk lot purchasers, including those seeking to retain the Sucralose Manufacturing Facility lease. Photos of the equipment, including brand new Stainless Fabrication Reactors, chillers, cooling towers, piping and centrifuges, are available at http://www.hgpauction.com/?auctionid=263. To gain access to the VDR please visit the above link for specific requirements, or contact George Wandachowicz (see contact info below) with any questions.

The Auction is expected to consist of six buying opportunities (Lots), ranging from the purchase of all of Mamtek’s assets in bulk to individual items tagged for sale if no bulk offer is accepted.

“We expect our upcoming auction of Mamtek’s brand new manufacturing assets and state-of-the-industry sucralose manufacturing facility to draw in a significant number of worldwide buyers,” stated Vice President George Wandachowicz of Heritage Global Partners.

About Heritage Global Partners (HGP)
Led by auction industry pioneers Ross and Kirk Dove, Heritage Global Partners is one of the country’s leading auction services firms, assisting large and small companies with buying and selling assets such as electronic test equipment and laboratory test equipment. A Counsel RB Capital company, HGP specializes in asset brokerage, inspection, and valuations, industrial equipment auction and real estate auctions, as well as enterprise auctions combining tangible and intangible assets.

RichTech Systems’ Transparent LCD Showcases Can Increase Sales

The transparent LCD showcase technology is an emerging trend for companies to display a wide range of products. These showcases use an entirely see-through LCD so that information, video, audio, text and company logos can all be displayed while the customer can still see the goods on display behind it. The screen also has touch screen functionality so that viewers can learn more about what is being displayed, find out about all of the different options and even order it all with the touch of a finger.

One particularly good use for the transparent LCD showcase is for jewelry display. Stores can use them in the shop window to help draw shoppers’ attention to the store and the jewelry products that are available for sale. These unique showcases can also be used on countertops to help to draw shoppers inside. The cutting edge technology can help to increase foot traffic, promote the brand, increase awareness of the store and even increase sales.

This technology is particularly good for displaying jewelry but also has a huge range of other settings that can be used. Transparent LCDs are also extremely effective in boardrooms, airports, tradeshows, conferences, museums, science centers, art galleries and any number of retail locations. This technology is perfectly suited to both retail and educational settings to provide information, sound, video and pictures to viewers.

The transparent LCD is available in a huge range of sizes from 10” for smaller uses to 60” for larger locations. Currently, the most popular sizes being sold are the 12” and the 22” showcases. These technologies are available for purchase at extremely reasonable price points, allowing even smaller retail locations to take advantage of all they have to offer. For instance, the 12” transparent LCD currently has a retail price of only $349.

These LCD solutions are also extremely easy to use. It features compatibility with a variety of video, audio and graphic formats and is set up for users to literally plug and play. Users can use CF, SD and USB card storage to set up the text, images and video to be displayed on the see- through LCD screen.

This engaging technology is sure to be seen in an ever increasing variety of settings as people become more aware of the possibilities that it has to offer. Visit the RichTech Systems Ltd. website at http://www.richtechsystem.com/html/transparent-video-showcase.html to see photos and videos of this technology in action.

About the Company:
RichTech Systems Ltd. is an award winning company that provides the technology for interactive multi-media displays. Their innovative digital media products include virtual reality applications, interactive projection technologies, multimedia displays and touch system products. These products can be used by a wide variety of businesses to help capture the audience’s attention and showcase their brand in entirely new and unique ways. These technologies can be used in retail locations, boardrooms, airports, museums, tradeshows and more. Visit their website at http://www.richtechsystem.com for more information.

Contact Details: 6185 S. Pecos Rd, Las Vegas, NV 89122
1-866-204-2158
info@richtechsystem.com
www.richtechsystem.com

Shipping magnate Abdul Qadir Rahman Buhari, the Managing Director of The WAM International, has sealed yet another tender floated by the Tamil Nadu Electrical Board

Shipping magnate Abdul Qadir Rahman Buhari, the Managing Director of The West Asia Maritime International is beginning to raise a few eyebrows in the shipping corridors. In his dogged pursuit of owning ships and winning contracts, the captain of the Chennai-based Corporation has sealed yet another tender floated by the Tamil Nadu Electrical Board which, sources say is tailor-made for Mr Buhari’s self-unloading bulk carrier – the Gem of Ennore, which is intended to move thermal coal from Paradip in Orissa to Ennore/Tuticorin/Karaikal.

The haulier is currently time-chartered by the Tamil Nadu State-owned Poompuhar Shipping Corporation and its 10-year charter period ends Sept/Oct, 2012.

Interestingly, the TNEB’s fresh tender appears to be designed in such a way that no other ship in India has the capacity to bid for it (the tender for the contract has specifically asked for a self unloader feature on the vessel). It’s a home-run for the Gem of Ennore and a smooth transition from one deal to another.

One happens to wonder how a credible agency like PSCL, hired by TNEB for its coal procurement, can be so short-sighted while selecting a vendor. In a country that depends on its coasts for a wide variety of goods, it’s appalling to observe errors in judgement in significant projects with massive financial ramifications.

There is a project that is currently underway to install two gantry cranes at the Ennore port for discharging gearless vessels. The venture is expected to be completed in under 2 years’ time.

The TNEB, amusingly, has brought out a 5-year charter period. The value of a self unloader becomes moot in two years (the gantry cranes are being installed to do exactly what an unloader does). Therefore, the un-loader becomes redundant for the next three years (more of an additional burden to TNEB) and these are the years when the charter hire (around Rs. 20 lakhs plus per day) are 30% to 40% higher than the current rate.

Additionally, infrastructure (gantry cranes) built at huge costs will be under-utilised. These are the years, when having two gearless panamaxes will be financially more viable and sensible than operating the un-loader. In fact, chartering of two gearless vessels to achieve and maintain the same level of transport and supply efficiency at comparable costs would make more economic sense than a self unloader, especially since the gantry cranes are scheduled to come up within two years.

The gantry cranes are being built at the cost of the taxpayers’ money and the government ought to look into it and plug the loophole. Interestingly, the Gem of Ennore was converted more than 10 years ago to suit the requirements of charter.

It was built as a gearless Panamax in 2000 at the Hitachi Zosen Shipyard in Japan. In 2001, she was converted to a self-unloader with cranes and conveyor in China, exclusively for carrying thermal coal from Paradip port in Orissa to Ennore in Tamil Nadu for the Tamil Nadu Electricity Board. One wonders if the West Asia Maritime Ltd had an idea of things to come in future.

There are zero opportunities for the other bidders for whom there is no level-playing field. Comparatively, the rate for a charter hire per day is Rs. 14.49 lakh for GoE while a gearless panamax rate is 5.35 lakhs. It is evident that the cost per ton to TNEB on the unloader is much higher than carrying the coal on gearless panamaxes.

Why not float a tender for a period of one year instead of tying it down for five years? Even if TNEB considers chartering a self un-loader, the period should be limited to one year only and reviewed for continuation in 2013, considering the fast-changing ground realities.

The vessel has to be provided within the lay days which are less than two months away. A major conversion such as this takes no less than 5 to 6 months. Therefore, there is a conflict here. The chartering negotiations were going on as of 3rd week of July and the vessel is required no later than 15th October.

One cannot help but wonder about the track record of the shipping giant. WAMSPL (Singapore) entered into two contracts with Euroceanica, UK, in 2008 for the time-charter of 2 19,800 DWT chemical tankers – namely ‘LBU Onyx’ and ‘JBU Opal’ for a period of 5 years. WAMPSL is a subsidiary of West Asia and accordingly West Asia, Chennai, provided performance guarantees for each ship.

‘LBU Onyx’ and ‘JBU Opal’ were delivered to WAMSPL by Euroceanica in September 2008 and April 2009, respectively. The charter parties for the two vessels had a balance of approximately 32 months and 39 months to be performed when things started to go wrong.

WAMPSL failed to pay hire rates on time under both the contracts, as a result of which, Euroceanica arrested MV ‘Gem of Safaga’ in Australia as a security for their claim in November 2009.

“Euroceanica and WAM then agreed to settle for payments in installments and charter back to Euroceanica” Buhari said however, WAM once again failed to honour their obligations under the settlement agreement and eventually both WAM and Euroceanica agreed to disagree and terminate the contracts.

The total accrued debt of approx 8 million dollars was then renegotiated to around 5.75 million dollars. As a result of further failure, the owners were forced to secure an arrest order on ‘Gem of Paradip from Mumbai High Court on 21st October, 2011. ‘GoP’ was the only vessel wholly owned by WAM at the time and was arrested at Vizag around 25th October, 2011, where she remained under arrest and idle until her release by the Court 35 days later.

“To put an end to the whole sordid affair, both WAM and Euroceanica agreed to settle on a figure slightly over 3 million dollars” WAM quoted.

Contact Details: chennai, tamailnadu