Category Archives: Electronics

Business, Electronics, Technology

Fulham To Debut New 70W HotSpot Plus™ LED/Emergency Combo Drivers at LightFair 2018

Leave a comment

New HotSpot Plus 70S Newest Addition to Fulham Line of Compact, Universal Voltage LED and Emergency Drivers that Can Be Installed Almost Anywhere.

Hawthorne, CA, USA — Fulham, a leading supplier of lighting components and electronics for commercial and specialty applications, today announced that it will introduce the HotSpot Plus™ 70S universal voltage 70W LED / 7W emergency combination driver at LightFair 2018 next week. The HotSpot Plus 70S is Fulham’s newest compact LED driver to support both conventional and emergency lighting in one, easy-to-install unit.

Featuring some of the most advanced power supply technology in the lighting industry, the HotSpot Plus 70S is comparable in size to non-emergency 70W LED drivers. The Hotspot Plus 70S was developed for installers and OEMs looking for a highly reliable, universal LED driver that would meet state and city safety requirements in a single, compact, all-in-one LED driver. Ideal for luminaire manufacturers where LED driver space is limited, the HotSpot Plus 70S has the smallest form factor available and features universal 120-277VAC input with a maximum of 70W output (programmable constant current output of 350mA – 2400mA /11-55VDC), which means customers can stock a single LED driver for a broad range of fixtures. The total product size of the 70S, including the 14.4Wh battery, is 1.18 inches wide and 1 inch high, with an overall length of 16.71 inches.

For emergency lighting, the HotSpot Plus 70S features 1W to 7W programmable constant power emergency output that can provide up to 90 minutes of runtime at 7W with a replaceable LiFePO4 battery. The HotSpot Plus has a 12-hour battery recharge time and comes with a red/green self-diagnostic indicator to simplify maintenance and troubleshooting.

“The lighting market is changing rapidly so we developed our line of HotSpot Plus products to support both conventional and emergency lighting needs in one LED driver package. This results in the smallest solution possible with less inventory and faster installation because of the reduced wiring,” said Alvaro Garcia, Product Director, LED Emergency and Advance R&D, for Fulham. “The compact design, wide output voltage, and programmability allow Fulham customers to use the HotSpot Plus in almost any new or retrofitted lighting fixture.”

Like all HotSpot Plus units, the HotSpot Plus 70S features 0-10V dimming (1-100 percent) and it can be quickly programmed using Fulham’s SmartSet handheld programmer or SmartSet PC software. The HotSpot 70S will be CEC Title 20 compliant, UL LISTED, CE and ENEC certified. The HotSpot Plus 70S comes with Fulham’s five-year warranty.

Fulham’s HotSpot Plus LED/emergency drivers will be on display at LightFair 2018 in Booth 602. For more information, visit http://www.fulham.com.

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, socially-conscious sustainable commercial lighting components and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the Netherlands, China, India and the UAE. For more information, visit http://www.fulham.com. @FulhamUSA and @FulhamEurope.

Media Contact:
Andy Firchau
Marketing Manager
Fulham Co., Inc.
Phone: +1 (323) 779-2980, ext. 1252
afirchau@fulham.com

Homepage

Business, Electronics, Technology

Fulham to Roll Out New Line of LinearHO High Output LED Retrofit Kits at LightFair 2018

Leave a comment

New Vizion 22-inch and 44-inch Universal Voltage LED Kits Designed to Help OEMs and Distributors Take Advantage of Growing Lighting Retrofit Market.

Hawthorne, CA, USA — At LightFair 2018 being held in Chicago May 8-10, Fulham, a leading supplier of lighting components and electronics for commercial and specialty applications, will display its new line of Vizion LinearHO high-output LED retrofit kits. Designed to retrofit high-bay, vapor tight, and troffers, the new Vizion LinearHO kits are suitable for commercial and damp environments and deliver substantial energy savings when used to replace fluorescents lamps.

All kits in the Vision LinearHO line are high-lumen, high-efficacy units designed to replace and enhance where traditional linear lamps would have previously been used. The Vizion LinearHO kits are available in 22-inch and 44-inch lengths and support universal voltage (120V to 277V) with 0-10V dimming. The kits are also compatible with most of Fulham’s LED emergency lighting systems. They are ideally suited for application such as partaking structures, stairwells, warehouses, commercial and industrial installations, offices, schools, and airport hangars.

“Industry experts predict that luminaire retrofit sales will make up 50 percent of the LED lighting market through 2024,” said Edwin Reyes, Product Director, LED Light Sources, for Fulham. “With the introduction of the Vizion high-output linear LED modules, we can now offer our OEMs and distributors a comprehensive line of LED retrofit kits suitable for any application or environment.”

There are a dozen retrofit kits in the Vizion LinearHO family, including four 22-inch vapor tight and troffer units and seven 44-inch vapor tight, troffer, and high-bay units. All the Vizion LinearHO retrofit kits deliver high-lumen, high-efficacy performance for greater energy savings. They are UL classified for field installation, as well as DLC, which typically requires five to ten minutes per kit. Kits are available in 3000K, 3500K, 4000K and 5000K color temperatures, with 80CRI. They also feature pre-mounted magnets and push-in connectors for easiest installation and are self thermally managed due to their extruded aluminum design. In addition, the kit comes with a two- or four-module harness allowing for ease of installation when connecting the modules to the driver.

Fulham’s Vizion LinearHO retrofit kits will be on display at LightFair 2018 in Booth 602. For more information, visit http://www.fulham.com.

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, socially-conscious sustainable commercial lighting components and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the Netherlands, China, India and the UAE. For more information, visit http://www.fulham.com. @FulhamUSA and @FulhamEurope.

Media Contact:
Andy Firchau
Marketing Manager
Fulham Co., Inc.
Phone: +1 (323) 779-2980, ext. 1252
afirchau@fulham.com

Homepage

Business, Electronics, Technology

Fulham Exec to Speak on Clever Lighting Strategies as Building Blocks for Building Automation at Niagara Summit

Leave a comment

Fullham’s Russ Sharer to Discuss How Smart LED Luminaire and Sensors for Smart Lighting Deliver on the Promise of Native IoT for Niagara Framework®.

New Orleans, LA, USA — Tridum’s Niagara Framework is being recognized as the de-facto standard for building management, providing single-screen control of physical, mechanical and environmental building properties. As the demand for Internet of Things (IoT) compatibility grows as a necessary requirement for controls systems, lighting and their sensors become the ideal data gathering points for IoT analytics, AI and machine learning applications to reveal the “golden nuggets” of business intelligence. That’s the topic that Russ Sharer, Vice President of Global Marketing for Fulham, Co., Inc., will be discussing in a session entitled “Clever Lighting: Leveraging the Power of Niagara to Build the Exoskeleton for IoT” at the Niagara Summit, being held here April 15-17.

In his presentation Sharer will discuss the advent of clever lighting – programmable LED light fixtures with on-board sensors – and how clever lighting can deliver more data directly and natively into the Niagara Framework and, ultimately, IoT systems. Lighting is the most prevalent electrical system in any building, and strategically placed sensors in luminaires can support new control systems based on the movement, behavior, and actions of building occupants. Connecting clever lighting end points provides a cost-effective means to deploy the sensors needed to feed Niagara directly as well as associated IoT systems.

“For too long lighting system have been focused solely on illumination,” said Sharer. “The new generation of clever luminaires with integrated sensors can deliver new types of data to Niagara natively via direct end-point communications. By connecting luminaires and their sensors to Niagara platforms directly, Niagara users will have a system that delivers previously unavailable building information, enhancing the value of Niagara based IoT edge controllers and paving the way for IoT communications.”

Sharer predicts that clever lighting units could be adapted to monitor and manage various building functions. For example, locally installed sensors could also be used to detect heat, humidity, measure air quality to provide additional information to HVAC systems. Information derived from Clever luminaires and sensors could also be used to augment life safety systems. And with the number of luminaries in close proximity in the average commercial building, clever lighting components can be readily connected using wireless technology such as Bluetooth Mesh, which could simplify installing luminaire retrofits to support Niagara building controls.

Fulham is a leading supplier of clever LED lighting components and has been working with partners to promote intelligent lighting by connecting clever luminaires. The company also offers elitedali™, a native DALI Niagara product that can transform any NiagaraAX or Niagara4 platform into an IoT convergent lighting commissioning and control platform.

For more information, visit Fulham Controls at http://www.control-network-solutions.co.uk.

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, socially-conscious sustainable commercial lighting components and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the Netherlands, China, India and the UAE. For more information, visit http://www.fulham.com. @FulhamUSA and @FulhamEurope.

Media Contact:
Andy Firchau
Marketing Manager
Fulham Co., Inc.
Phone: +1 (323) 779-2980, ext. 1252
afirchau@fulham.com

Homepage

Biotech, Electronics, Healthcare

FINALLY, A REAL INNOVATION IN DENTAL CARE – THE ONLY DUAL MODE LIGHT THERAPY ELECTRIC TOOTHBRUSH LAUNCHES ON KICKSTARTER

Leave a comment

Los Angeles, California, 2018-Mar-26 — /REAL TIME PRESS RELEASE/ — Bristl combines proven science of light therapy with sonic vibration to improve oral care. The company also offers a subscription service to replace brush heads, so having the best oral health is also convenient.

Available on Kickstarter on Monday, March 26th at 9am (PST)

The combination of Bristl’s features, convenience, and style make for true market disruption:

Gum Health
Visible Red light (620–750 nm in wavelength) has been clinically proven to heal gum tissue and prevent inflammation. The same technology is often used in skincare; Bristl is bringing it to the everyday tooth brushing routine.

Kill Bacteria
Visible blue light (450–495 nm in wavelength) has been clinically proven to kill and prevent oral bacteria that causes gingivitis and other gum disease. This safe and natural blue light is proven to be effective, and Bristl is proud to bring it to market.

Get Rid of Plaque
Bristl has three sonic vibration modes: regular, gentle, and off. Sonic vibration is recommended by dentists as it has the highest cleaning ability without damaging gums. The brush head is also particularly designed to reach in crack and crevices while letting light pass through the bristles.

A Few Stats
According to a study published in the Journal of Periodontology and Implant Science (Vol. 44: pp. 280-287), Bristl’s technology (even with only red light) was effective in achieving the following:

  • 86% reduction in bacteria that causes destruction of tooth supporting tissue
  • 117% improvement in PPD (Periodontal Pocket Depth) which indicates gum health
  • 80% improvement in CAL (Clinical Attachment Level) which is another metric for gum health

Why Us?
The Bristl Science team consists of a group of innovators and scientists looking to use advanced technology to improve everyday lives. While we of course wish to build a successful business, we are doing so responsibly; Bristl has committed to donating a percentage of every sale to America’s Toothfairy to provide underserved children with dental care. Whether a customer or an underserved child, we’re on a mission to maximize oral health everywhere.

This is just the beginning. The Bristl Science team will work tirelessly to innovate and build products that improve lives, maximize health, and promote good. The Bristl light therapy toothbrush is just the first step toward a healthier future.

Clinical backing, photos, founders quotes, and more information can be found in our Media Kit:
http://bit.ly/2HtKTJ8

Campaign Preview: https://www.kickstarter.com/projects/574806194/565862801?ref=450743&token=dbd4feaa

If you have any questions at all, fee free to give us a call or shoot us an email.

Engineer, Cofounder, Media Contact:

Billy Walker
billy@bristlscience.com
763-607-2889

Business, Electronics, Technology

Fulham Demonstrates Bluetooth Mesh and PoE Technology for LED Lighting Control at Light+Building

Leave a comment

Fulham’s connected lighting controls shows the potential of Bluetooth mesh and Power over Ethernet for intelligent lighting commissioning and management.

FRANKFURT, Germany — At Light+Building this week, Fulham Co., Inc., a leading supplier of lighting components and electronics for commercial and specialty applications, will demonstrate new wireless lighting control technology that uses the Bluetooth mesh control stack from Silvair to provide two-way communication to smart light fixtures. Fulham also will demonstrate new Power over Ethernet (PoE) LED Linear Engine technology combining DC power and smart lighting control. The technology demonstration of lighting controls will be shown in Hall 4.0, Stand A12.

Fulham’s Light+Building Bluetooth mesh demonstration will include a Bluetooth to 0-10V LED controller and a 40W LED driver with add-on Bluetooth connectivity via a Fulham Intelligent Wireless Module. Both products will be used to control third-party sensors and wall switches, showing the promise of Bluetooth Mesh compatibility. These are some of the very first wireless LED controllers to provide two-way Bluetooth communications, enabling control commands and commissioning as well as data gathering for performance monitoring and analytics.

Bluetooth mesh can be used to enable a wireless lighting management ecosystem that can quickly pay for itself, as well as laying the foundation for centralized lighting controls as the foundation for IoT (the Internet of Things). ABI Research predicts there will be 48 billion Internet-enabled devices installed by 2021, including smart luminaires, and open standards such as Bluetooth mesh will make it possible to consolidate these devices into an IoT infrastructure. Fulham is demonstrating a prototype app that shows how sensors in luminaires can be used for additional IoT functions such as managing HVAC, alarm systems, emergency exit signs, and smart door lock controls.

Adopting Bluetooth mesh for wireless lighting controls offers a number of advantages since Bluetooth is a well-defined, open standard that promises fast, reliable performance and scalability. Mesh networking was designed for applications such as building automation, supporting many-to-many communications, and it is ideally suited for connected lighting since it can simultaneously connect sensors in hundreds to thousands of luminaires.

Fulham also will display a new PoE Linear LED Engine technology, which can be integrated into a variety of form-factors . Unlike previous generations of PoE products that can only issue commands via a 0-10v interface, the PoE LED Engine connects directly to the LED light module, providing complete two-way communication with the fixture to gather data about luminaire performance, power consumption, and operating temperature, as well as issuing commands such as on/off, diming, color tuning and timed scheduling.

Using PoE to power LED luminaires simplifies installation, since only one cable is needed for both power and controls. PoE provides the LED luminaries with a low-voltage DC power source providing up to 52W of power. This makes the luminaire more energy efficient and less costly since no conversion drivers are required.

PoE also allows makes it easier to accommodate high bandwidth sensors such as IP cameras in the same network infrastructure used to power and control lighting. With PoE, each LED luminaire has a unique IP address, making it easy to add lighting to an IoT infrastructure, including remote management over the Internet.

“We have been developing clever LED products with integrated programmability for some time. The next step toward smart lighting is to add communications to programmability, and our technology demonstrations at Light+Building will highlight some of the possibilities offered networked lighting ecosystems,” said Russ Sharer, Vice President of Global Marketing and Business Development for Fulham. “In addition to providing two-way communications for both control and data gathering, using open standards such as Bluetooth Mesh and Power over Ethernet to connect luminaires paves the way for IoT integration. LED lighting with built-in sensors creates an ideal framework for IoT infrastructure. These technologies have been requested many times by our OEMs, and we are excited to share their status.”

For more information, visit Fulham at Light+Building 2018 in Hall 4.0, Stand A12, or visit http://www.fulham.com.

#LB18
#BLEmesh4lighting
#BLEmeshecosystem

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, socially-conscious sustainable commercial lighting components and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the Netherlands, China, India and the UAE. For more information, visit http://www.fulham.com. @FulhamUSA and @FulhamEurope.

Media Contact:
Andy Firchau
Marketing Manager
Fulham Co., Inc.
Phone: +1 (323) 779-2980, ext. 1252
afirchau@fulham.com

Homepage

Business, Electronics, Technology

Fulham Partners with Silvair to Demonstrate Bluetooth Mesh Technology for LED Lighting Controls at Light+Building 2018

Leave a comment

Fulham’s wireless lighting controller realizes the potential of Bluetooth mesh for intelligent lighting commissioning and management.

FRANKFURT, Germany — At Light+Building 2018, Fulham Co., Inc., a leading supplier of lighting components and electronics for commercial and specialty applications, will demonstrate new lighting control technology using the Lighting Firmware based on the core Bluetooth mesh stack provided by Silvair, a pioneer in lighting control technology. Fulham will be showing its Bluetooth mesh lighting controllers as well as software for smart luminaires in Hall 4.0, Stand A12.

Fulham’s Light+Building 2018 technology demonstration will display products including a Bluetooth to 0-10V LED controller and a 40W LED driver with Bluetooth connectivity via a Fulham Intelligent Wireless Module. The display will include a presentation of control using third-party sensors and wall switches in a Bluetooth mesh environment.

Fulham’s demonstration incorporates Silvair’s wireless lighting control technology based on Bluetooth mesh which gives users control and data gathering capabilities. Adopting Bluetooth mesh networking technology and Silvair’s wireless lighting control solution offers numerous advantages since Bluetooth is a well-defined, open standard that provides a fast, reliable performance, unmatched scalability, high-level security and out-of-the-box interoperability. Mesh networking was designed for building automation applications since it enables many-to-many communications. It is ideally suited for connected lighting as it can simultaneously connect sensors in hundreds or thousands of luminaires. Silvair’s Lighting Firmware based on Bluetooth mesh promises to offer a wireless lighting management ecosystem that can quickly pay for itself, as well as laying the foundation for centralized lighting controls using IoT (the Internet of Things).

“OEMs have been weighing the best approach to smart lighting controls and our partnership with Silvair marks a key step in Fulham’s demonstration of a new wireless lighting control,” says Russ Sharer, Vice President of Business Development for Fulham. “Our goal is to work with OEMs to give them a choice when it comes to lighting control. With our clever lighting products, we have already added programmability to solid-state luminaires. Support for Bluetooth mesh marks the next logical step in lighting communications as the industry moves toward truly intelligent lighting.”

“It is truly wonderful that Fulham joins us as one of our partners showing Silvair’s wireless lighting control solution based on the Bluetooth mesh technology. I am excited to see the upcoming changes in the lighting industry caused by our collaboration to bring a new generation of Bluetooth mesh enabled smart lighting components to the market.” says Rafal Han, CEO and co-founder at Silvair. “We cannot wait to demonstrate these products for the first time at Light + Building 2018. Silvair’s relationship with Fulham is an important step for making an interoperable smart lighting ecosystem a reality.”

In addition to lighting controls, Bluetooth mesh networking can be used for other IoT applications, working with sensors already located in luminaires to control HVAC systems, alarm systems, fire controls, and other building controls. ABI Research predicts there will be 48 billion Internet-enabled devices installed by 2021, including smart luminaires, and open standards such as Bluetooth mesh will make it possible to consolidate these devices into a central IoT infrastructure.

For more information, visit Fulham at Light+Building 2018 in Hall 4.0, Stand A12, or visit http://www.fulham.com.

#LB18
#BLEmesh4lighting
#BLEmeshecosystem

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, socially-conscious sustainable commercial lighting components and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the Netherlands, China, India and the UAE. For more information, visit http://www.fulham.com. @FulhamUSA and @FulhamEurope.

Contact:
Andy Firchau
Marketing Manager
(323) 779-2980, ext. 1252
afirchau@fulham.com

About Silvair
Silvair (http://www.silvair.com) provides complete and flexible lighting control solutions based on Bluetooth mesh networking technology. Component manufacturers can easily integrate them into a variety of products, flexibly choosing specific features in accordance with their customers’ needs. In addition, our intelligent lighting platform includes dedicated tools for commissioning and managing connected lighting systems in commercial buildings, effectively future-proofing them against increasingly stringent energy codes. Visit Silvair’s booth no. E80, hall 9.1 at Light + Building 2018 to see and learn more about the fully interoperable lighting control systems based on Bluetooth mesh networking technology.

Business, Electronics, Technology

Fulham Demonstrates Newest Versions of FireHorse Emergency Ballasts; Now Compliant with CEC Title 20

Leave a comment

Fulham Upgrades Emergency Ballasts to Newest Energy Conservation Standards Giving Distributors Compliant Fluorescent Options for New Installations and Retrofits.

Long Beach, CA, USA — At Strategies in Light this week, Fulham, a leading supplier of lighting sub-systems and electronics for commercial and specialty applications, will display the newest version of its FireHorse 11 (FH11) and FireHorse 7 (FH7) emergency fluorescent ballasts, which have been re-engineered to meet California Energy Commission (CEC) Title 20 specifications. The new FireHorse ballasts are not only more energy efficient to comply with Title 20, but they also operate with universal voltage so they can be installed in virtually any setting.

In compliance with CEC Title 20, once they are fully charged, the new FireHorse ballasts consume less than 1W of power in order to sustain emergency readiness. The FH11 ballast is designed to deliver a maximum light output of 750 lumens with a minimum illumination time of 90 minutes on battery power. The FH7 universal voltage emergency ballast delivers up to 500 lumens for a minimum of 90 minutes.

“While Fulham continues to be a leader in LED components, we recognize that our customers will continue to need fluorescent lighting for some time,” said Russ Sharer, Vice President of Global Marketing for Fulham. “With new energy conservation requirements for Title 20 products, we know both the FH11 and FH7 will be popular with our distributors. Contractors across the U.S. are looking for more energy-efficient lighting solutions; in fact, many earn a percentage of the energy they save. Supporting Title 20 compliance with lower wattage fluorescents will help everyone, even contractors who don’t install lighting in California.”

Like many of Fulham’s LED products, the new emergency fluorescent ballasts offer universal voltage with input currents ranging from 120 to 277V A. That means less inventory and lower costs for distributors and installers, since the units are compatible with more lamps. The units have an operating temperature between 0 and 55 degrees Celsius (32 and 131 degrees Fahrenheit) and are compliant with UL924, damp-rated, and field or factory installable.

For more information, visit Fulham at Strategies in Light booth 408 or go to http://www.fulham.com.

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, socially-conscious sustainable commercial lighting components and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the Netherlands, China, India and the UAE. For more information, visit http://www.fulham.com. (@FulhamUSA and @FulhamEurope)

Media Contact:
Andy Firchau
Marketing Manager
Fulham Co., Inc.
Phone: +1 (323) 779-2980, ext. 1252
afirchau@fulham.com

Homepage

Business, Electronics, Technology

Fulham Releases New White Paper at Strategies in Light – “Energy Star, DLC, and T24 Testing: Sorting through the Requirements”

Leave a comment

Fulham White Paper Demystifies Light Performance Testing and Provides Valuable Tutorial for Anyone Interested in Lighting Certifications.

Long Beach, CA, USA — At Strategies in Light being held here this week, Fulham Co., Inc., a leading supplier of lighting sub-systems and electronics for commercial and specialty applications, will release a new white paper that provides an overview of new energy saving standards and LED product certifications. The white paper, entitled “Energy Star, DLC, and T24 Testing: Sorting through the Requirements,” is designed to help OEMs, distributors, and lighting professionals sort through the alphabet soup of today’s energy product testing and qualification as it relates to lighting products.

Product testing for certification are important to the lighting industry because they provide standardized metrics to compare product performance. Setting minimum performance thresholds promotes better quality lighting and superior luminaires for OEMs and end users. However, testing can cost manufacturers thousands of dollars for every new product brought to market. this white paper reviews strategies for product testing and how qualifying for the Design Lighting Consortium (DLC) Qualified Products List, compliance with Energy Star standards, and conforming to the California Energy Commission’s (CEC) Title 24 Energy Code each play both unique and overlapping roles in lighting certification, testing, and labeling.

“OEMs and installers use DLC, Energy Star, and T24 labels to ensure that lighting products deliver optimal performance, conform to the building codes and energy conservation standards, and in many cases receive financial rebates and incentives on projects,” said Russ Sharer, Vice President of Global Marketing for Fulham. “Certification gives customers assurance that the lighting products they buy or stock are safe and efficient. However, it’s not always easy for vendors to determine which certifications are required, or where to invest their testing dollars. This white paper should provide an informative tutorial for anyone in the lighting industry who relies on testing and verification to make product decisions.”

The new Fulham white paper outlines the testing requirements and regimens for the three most common U.S. certifications, comparing DLC, Energy Star, and Title 24 It also discusses specific requirements to for each standard and offers suggestions on ways to take advantage of overlapping requirements that can save test dollars.

Fulham will have copies of “Energy Star, DLC, and T24 Testing: Sorting through the Requirements” on hand at Strategies in Light in Booth 408. Copies also are available online at http://www.fulham.com/PDFs/Fulham-White-Paper-Energy-Star-DLC.pdf.

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, socially-conscious sustainable commercial lighting components, sub-systems, and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the Netherlands, China, India and the UAE. For more information, visit http://www.fulham.com.

Media Contact:
Andy Firchau
Marketing Manager
Fulham Co., Inc.
Phone: +1 (323) 779-2980, ext. 1252
afirchau@fulham.com

Homepage

Business, Electronics, Technology

Fulham VP to Address Problems of Lighting Controls and the Need for Interoperable Standards at IoT Evolution

Leave a comment

Fulham’s Russ Sharer to Show How Lighting Industry Serves as a Test Case for IoT Interoperability in Presentation on “How Smart Lighting Headaches are Delaying IoT”.

Orlando, FL, USA — For industrial lighting controls to become part of any Internet of Things (IoT) infrastructure the lighting industry is going to have to overcome two primary hurdles: 1) lack of intelligence in lighting devices and 2) a lack of common control standards. That’s the primary focus of “How Smart Lighting Headaches are Delaying IoT,” a presentation to be delivered by Russ Sharer, Vice President of Global Marketing for Fulham Co., Inc., at IoT Evolution to be held here January 22 -25.

Fulham is a leading supplier of programmable LED lighting sub-systems and has been working with lighting vendors and OEMs to shape the future of intelligent lighting and IoT. As Sharer notes, there already is a new category of “clever” LED lighting products with on-board intelligence and programmability. To elevate these clever devices to smart lighting requires integration as well as intelligence, providing two-way communications for device monitoring and control. This is where the lighting industry is lagging behind; adopting common communication standards that can integrate current lighting controls into an IoT infrastructure.

“The challenges the lighting community are facing are typical of many industries; how to develop a common set of protocols to integrate legacy smart devices into an IoT infrastructure, said Sharer. “Clearly, IoT is going to be the foundation for building automation, but there are too many proprietary lighting control and communications standards. Today, customers can choose between DALI, Zigbee, Bluetooth, Wi-Fi and many more for lighting controls, but there is still no guarantee of integration with a central IoT platform.”

To complicate the interoperability issue, many vendors are creating their own flavors of popular control standards. For example, some vendors are using DALI electrically and signaling, but adding proprietary commands for basic functions. Similarly, Zigbee has multiple variants of commands for when a luminaire is turned “off,” so two luminaires can receive the same signal and one device dims while the other turns off completely, which matters when it comes to energy consumption and extending the life of the luminaire.

“The teething pains of the lighting control industry are the perfect test case for other IoT control applications,” said Sharer. “It shows that without a well-defined set of common control standards, there is no way to implement control using IoT.”

Sharer’s presentation, “How Smart Lighitng Headaches are Delaying IoT,” is scheduled to take place Thursday, January 25, at 10:00 a.m. – #IOTEVOLUTION.

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, socially-conscious sustainable commercial lighting components and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the Netherlands, China, India and the UAE. For more information, visit http://www.fulham.com. (@FulhamUSA and @FulhamEurope)

Media Contact:
Andy Firchau
Marketing Manager
Fulham Co., Inc.
Phone: +1 (323) 779-2980, ext. 1252
afirchau@fulham.com

Homepage

Business, Electronics, Technology

Fulham Introduces Universal Voltage Version of Integrated DirectAC LED Engine and Retrofit Kit

Leave a comment

New Universal Voltage DirectAC LED Features Integrated Driver and is Suitable for Open and Closed Luminaires With or Without Lenses.

Hawthorne, CA, USA — Fulham Co., Inc., a leading supplier of lighting sub-systems and electronics for commercial and specialty applications, today announced the release of universal voltage versions of its DirectAC direct-drive LED units. The DirectAC LED Engines were released earlier this year in a 120V and with this product release, the same low-profile, self-contained LED engine with integrated driver is now available in a new unit that can support power ratings from 120 to 277 volts.

The DirectAC LED Engine was designed with the driver integrated on the circuit board, resulting in a cost-efficient, highly reliable lighting solution suitable for use in wall sconces or ceiling luminaires, either as new lighting installations or retrofits. The integrated LED driver makes for an extremely low profile, and now with universal voltage support, the same unit can be installed in virtually any setting. The Universal DirectAC LED Engine is suitable for open and enclosed luminaires, and luminaires with plastic and glass lenses.

“More of our customers are working on large construction and retrofit projects with multiple luminaire types, so we are seeing more demand for one-size-fits-all LED light kits,” said Edwin Reyes, Product Director, LED Light Sources, for Fulham. “The Universal DirectAC LED Engine is designed to provide a single, self-contained, low-profile lighting solution that can be installed anywhere in five to 10 minutes.”

The DirectAC LED Engines are available in 10, 15W, 23W, and 34W round configurations as well as a 15W, 4 by 7-inch rectangular configuration. The DirectAC LED Engines offer a lumen maintenance of L70>54,000 hours, with a color consistency of 3 SDCM and a variety of color temperatures with an 80 CRI up to 90 CRI, making them ideal for replacing fluorescents. The units are leading/trailing edge dimmable from 100 to 10 percent. To reduce flicker, the DirectAC Engines have additional circuitry for use with 50/60 Hz power lines; flicker is below 30 percent when operated at line voltage meeting the CEC requirement for low flicker.

All units are suitable for installation in dry and damp locations, indoor or outdoor. The units are cURus, cULus Classified and ENERGY STAR® Luminaire 2.0 listed so they qualify for most rebate programs.

The Universal DirectAC LED Engines are available from Fulham locations worldwide. For more information, visit http://www.fulham.com.

About Fulham
Fulham Co., Inc. is a leading global provider of intelligent, socially-conscious sustainable commercial lighting components, sub-systems, and electronics for use in commercial general lighting, parking structure, signage, horticultural, UV and other applications. The company develops and manufactures a variety of award-winning LED and emergency products, as well as legacy products across multiple lighting platforms. Fulham sells its lighting solutions worldwide through original equipment manufacturers (OEMs) and electrical equipment distribution channels. Headquartered in Hawthorne, Calif., the company has sales and/or manufacturing facilities in the Netherlands, China, India and the UAE. For more information, visit http://www.fulham.com.

Media Contact:
Andy Firchau
Marketing Manager
Fulham Co., Inc.
Phone: +1 (323) 779-2980, ext. 1252
afirchau@fulham.com

Homepage